BBA Agrément Certificate
Adhered PVC-P single ply roofing membrane for use on cold roof applications.
PVC-P single-ply roofing system for use on cold roof applications.
- Waterproof membrane:
Sarnafil G membranes are manufactured using a state of the art extrusion coating process that eliminates shrinkage and plastic memory and produces a dynamically stable membrane. In the coating process, a glass fibre carrier is coated on both sides with liquid Plastisol, prior to the application of a lacquer coating on the upper surface and laser marking of the membrane surface for identification. The unique lacquer coating eliminates the need for biocides, provides the membrane with an easy to clean surface and prolongs the life of the membrane by reducing plasticiser loss.
Polyurethane based adhesive, designed to adhere Sarnafil G410-ELF or TG76-Felt waterproof membranes to substrates of timber, concrete, or thermal insulation board.
Substrates should be solvent resistant, dry and free of oil and grease.
Roller applied solvent-based contact adhesive (red-coloured), designed to adhere Sarnafil G410-EL or G410-ELF waterproof membranes to substrates of steel, timber, concrete, or approved thermal insulation boards. Substrates should be solvent-resistant, dry and free of oil and grease.
Spray applied PU-based contact adhesive (red-coloured), designed to adhere Sarnafil G410-EL or G410-ELF waterproof membranes to substrates of steel, timber, concrete, or approved thermal insulation boards. Substrates should be solvent-resistant, dry and free of oil and grease.
Certified by BBA, in their opinion, to have a "life expectancy in excess of 40 years" for exposed applications, with periodic maintenance as stated below.
"A planned maintenance cycle, including inspections by the Certificate holder at minimum intervals of five years, should be introduced if an extended service life is required. The Certificate holder can advise on methods of extending the service life. This could include the use of thicker membranes, specific maintenance requirements or localised replacement and repair."
Should the maintenance cycle not be followed Sarnafil G/S membranes have been given, by the BBA in their opinion, a life expectancy of "in excess of 35 years".
Sarnafil G410-ELF is adhered directly to the substrate or a suitable thermal insulation board with either Sarnacol 2170, 2172 spray or Sarnacol 2142S. Laps are then hot air welded to form seams which are stronger than the membrane itself.
Installation is carried out by Sarnafil trained contractors.
J42/130 Cold deck roof covering
G410-ELF Adhered Cold Roof System
1.2 mm + felt
1.5 mm + felt
1.8 mm + felt
Copper Patina Green
White RAL 9016 SR (solar reflective)
G/S rainwater outlets
Sarnafil Constant Force post
Sarnafil heat weldable lightning conductor clips
Standard product features
Length of roll:
20 m (15 m for 1.8 mm thick membrane).
Available in standard colours. Other Colours may be available, subject to a lead time and minimum order quantities.
G410-EL Adhered Cold Roof System
G410-EL Adhered Roof System - Sarnavap 500E
G410-EL Ballasted Roof System - Sarnavap 500E & Sarnafil G445-13
G410-EL Green Roof System - Cuspated PUR Foam Drainage Board
G410-ELF Adhered Roof System - Sarnavap 500E
Sarnafil G410-EL FSA
Sarnafil S327-EL Mechanically Fastened Cold Roof System
Sarnafil TG76 Felt
Sarnafil TG76 Felt Adhered Cold Roof System