Fungicidal Wash
Description

A ready for use fungicidal solution, for the treatment of organic growth on exterior undecorated and all previously decorated surfaces. Can also be used on interior surfaces. Approved under the Control of Pesticides Regulations 1966 for use as directed. HSE Certificate No. 10482.

Features:

Apply by brush or non-atomising spray. Scrub well into surface.

Usage:

  • Designed for the treatment of organic growth on exterior undecorated and all previously decorated masonry surfaces.
  • Remove growth after use
  • Wash surfaces and allow to dry
  • The product is a surface treatment and does not provide preservation properties to any substrate.
  • Where growth is severe a second application may be necessary.

General information

Features

Apply by brush or non-atomising spray. Scrub well into surface

Uniclass 2015

Pr_35_31_68_33 Fungicidal coatingsPrimary

CAWS

M60/170 Masonry coating

Specification data - Fungicidal coatings

Product Reference

Sandtex Trade Fungicidal Wash

Standard product features

Composition:

Alkyl (C12-16) Dimethylbenzyl ammonium chloride (0.99% w/w), 2-phenylphenol (0.25% w/w).

Spreading rate:

  • Normal surfaces: 5-10 m²/ litre depending on surface porosity On textured or porous surfaces the spreading rate will be reduced

Drying time:

24 hours: then rinse with clean water and allow to dry.

VOC content:

Not applicable.

Third party certifications
  • Control of Pesticides Regulations 1966: HSE Certificate No. 10482
Similar products from Sandtex Trade, product of Crown Paints Ltd