NBS Source
List your products
Fortis Wall-top Seating
Description

Wall-top seating suitable for straight walls, allowing adjacent modules to be directly abutted to form continuous long runs of seating. Fortis Wall-top seating offers multiple timber slat configurations to give the best visual match for the site. Available with or without back and/ or armrests and in two standard lengths. Bench only versions are also offered in a short 440 mm depth to suit a two-brick thick wall width.

The addition of Fortis timber-topped seating platform on a wall provides compact and visually tidy seating solution on top of existing features in landscape schemes.

Installation:

Platforms are fitted to the top of the wall at four points for two-person platforms and six points for four-person platforms, through slots in the platform subframe, with dedicated threaded wall anchors and connecting bolts supplied with the product.

General information
Uniclass 2015
Pr_40_50_12_07 BenchesPrimary
CAWS

Q50/220 Benches

Q50/30 Street furniture

Specification data - Benches
Product Reference

FTW 2B 22L

Two-person, short-depth, bench platform, no arms.

FTW 3B 22L

Two-person bench platform, no arms.

FTW 3B 22L C

Two-person bench platform, end arms.

FTW 3B 4L S

Four-person bench platform, and centre arms.

FTW 3S 22L

Two-person seat, no arms.

FTW 3S 22L C

Two-person seat, end arms.

FTW 3S 4L S

Four-person bench platform, and centre arms.

Frame

Stainless steel, grade 1.4301 (304), bright polished

Stainless steel, grade 1.4301 (304), satin polished

Stainless steel, grade 1.4401 (316), bright polished

Stainless steel, grade 1.4401 (316), satin polished

Steel, galvanized finish

Standard.

Steel, polyester powder coated finish, RAL

Finished to any RAL colour; insert requirements.

Slats -
Material/ Finish

Iroko timber, smooth planed finish

Standard,.

Iroko timber, oiled finish

Iroko timber, UV protective finish

Seat slat size

Small

40 mm wide.

Medium

65 mm wide.

Large

140 mm wide.

Backrest slat size

Not applicable

Bench platforms.

Small

40 mm wide.

Medium

65 mm wide.

Large

140 mm wide.

Backrest height

Not applicable

Bench platforms.

High

Low

Installation

Not applicable

Single platforms.

Abutted

100 mm gaps

Product Options

Technical characteristics:

- FTW 2B 22L:

  • Length: 1340 mm.
  • Depth: 440 mm.

- FTW 3B 22L:

  • Length: 1340 mm.
  • Depth: 590 mm.

- FTW 3B 22L C:

  • Length: 1340 mm.
  • Depth: 590 mm.

- FTW 3B 4L S:

  • Length: 2540 mm.
  • Depth: 590 mm.

- FTW 3S 22L:

  • Length: 1340 mm.
  • Depth: 590 mm.

- FTW 3S 22L C:

  • Length: 1340 mm.
  • Depth: 590 mm.

- FTW 3S 4L S:

  • Length: 2540 mm.
  • Depth: 590 mm.

Installation:

- Abutted:

Seating platforms can be installed directly next to each other, or immediately adjacent to any upstand such as a wall, but this will mean that timber slats can only be replaced by removing the whole platform off the wall.

- 100 mm gaps:

Installing platforms with gaps of approximately 100 mm between, or to any upstand such as a wall, will allow individual slats to be replaced without the need to remove the whole platform off the wall.

Literature
Similar products from Furnitubes International Ltd