NBS Source
List your products
Application

Suitable for various installations, including department stores, shopping centres, warehouses, factories and car parks.

Description

Fire-resisting roller shutters which have been tested to EN 1634-1 for fire resistance, and are rated E120-C0 in accordance with EN 13501-2 and EN 14600.

Features and benefits:

  • Construction: the shutter curtains are constructed from continuously interlocked 76 mm curved section steel laths, which are securely held in place by end locks. Lath thicknesses vary dependent upon opening size. Bottom rails are galvanized and roll-formed into a 'tee' section.
  • Guides: channel section galvanized mild steel guides, with slotted fixings for expansion in a fire, are fixed to the jambs with continuous steel angles.
  • Roller: the roller is made from seamless steel tube of adequate diameter to avoid deflection, and is supported on steel end plates on bearings.
  • Casings: a galvanized steel coil casing is supplied to maintain the fire seal at the head.
  • Operation: suitable for all sizes of shutters, the Speedsafe drive unit has a 240 V, single-phase or 400 V, three-phase geared induction motor with an electromagnetic brake, limit switches, release unit, a built-in starter panel and low-level key switch with an emergency stop button. The design provides a fail-safe system, which will close the shutter automatically in the event of a fire situation.
  • Activation is via a signal for the fire alarm system to an auto-reset solenoid, which when activated releases the motor brake, allowing the shutter to close by gravity with a controlled descent. A safety brake is supplied to comply with the safeguarding requirements of EN 12604.
  • Manual operation, in the event of a power loss, is achieved by releasing a pull cord to close the shutter under controlled descent, and a hand chain to open it.
  • The product is CE marked accordingly.

Applications:

Suitable for various installations, including department stores, shopping centres, warehouses, factories and car parks.

General information
Size

Bespoke; consult manufacturer for details and insert requirements.

Material

Galvanized steel

Standard.

Stainless steel, 1.4301 (304) grade

Optional.

Stainless steel, 1.4401 (316) grade

Optional.

Finish

Galvanized

Standard.

Polyester powder-coated, RAL

Insert requirements.

Uniclass 2015
Roller shutters (Pr_30_59_84_73)Primary
Specification data - Roller shutters
Product Reference

Fireroll E60 Fire Resisting Roller Shutters

Size

Bespoke; consult manufacturer for details and insert requirements.

Material

Galvanized steel

Standard.

Stainless steel, 1.4301 (304) grade

Optional.

Stainless steel, 1.4401 (316) grade

Optional.

Finish

Galvanized

Standard.

Polyester powder-coated, RAL

Insert requirements.

Operation

240 V, single-phase

400 V, three-phase

Accessories

None

Audiovisual warning

Heat/ smoke detectors

Standard product features

Weight:

Varies with opening size, dependent on lath/ barrel/ casing requirements, but approximately 35 kg/m².

Product Options

Finish:

Fireroll E120 is supplied with the majority of parts galvanized as standard. Where non-galvanized parts are utilized, these are finished with one coat of primer paint.

Similar products from Bolton Gate Company