NBS Source
List your products
Description

The Fireguard FT range is a compact tubular driven fire shutter that provides a fire protection barrier for 1–4 hours.

Tested to BS EN 1634-1, and compliant with BS EN 16034: 2014. Constructed from steel sections of 76 mm cold rolled 20 gauge galvanized steel. The FT60 shutter provides a defence against the spread of fire and can be used as a security door on a day to day basis. The compact design allows the FT compact range to be installed in areas where traditional fire shutters are not possible. The system can we linked to audio/ visual deacon fire alarms to ensure automatic closing in case of fire detection with battery backup in the event of power failure.

Usage:

The Fireguard FT roller shutter is commonly used in kitchen servery areas, schools, hospitals and commercial offices where installation restrictions for space require a compact system.

General information
Finish

Galvanised bright rolled mild steel, polyester powder coat colour's are available

Features

Compact tubular driven fire shutter which provides a fire protection barrier for 1-4 hours. Suitable for when installation restrictions for space require a compact solution. Complete with battery back up and optional audio/ visual deacon fire alarm connection to ensure automatic closing

Material

Steel

Size

76 x ≤ 7000 mm

Uniclass 2015 Roller shutters (Pr_30_59_84_73)
Specification data
Product Reference

FT01

One hour fire protection.

FT02

Two hour fire protection.

FT04

Four hour fire protection.

Finish

Galvanised bright rolled mild steel, polyester powder coat colour's are available

Shutter

Insert requirements.

Shutter Box

Insert requirements.

ProductInformation

www.hag.co.uk/hag-downloads.html

Standard product features

Width (maximum):

7000 mm.

Material:

76 mm flat galvanized steel lath.

Weight:

12.5 kg/ m² (dependent on size).

Finish:

Galvanized bright rolled carbon steel, but polyester powder coat colours are available at additional cost.

Shutter box:

- Construction:

1.5 mm bright spangle galvanized pressed steel coil casing available in various different designs to suit individual circumstances.

- Box sizes:

Overall height (top of box):

  • Up to 2000 mm: Box size 250 mm.
  • Up to 3000 mm: Box size 300 mm.
  • Up to 4000 mm: Box size 350 mm.
  • On larger widths the box sizes may move up one size due to deflection.

Guide rail:

- Construction:

50 x 32 x 3 – 76 x 32 x 3 mm (dependent on width and height).

- Finish:

Galvanized steel; standard polyester powder coat colours are available.

Product Options

Operation:

- Single phase electric:

  • A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating.
  • Draw: 240 V and 0.5–2.5 A dependent upon the shutter size.
  • Complete with battery back-up system that will enable self closure in the event of power failure.
  • Provision of a 13 A fused spur is required for installation.
  • Fire panel which can be interconnected to the fire alarm to allow closing when receiving fire signal. Audio visual warning and timer delay.
  • Important note: Maintenance of fire shutters is required under the Regulatory Reform (Fire Safety) Order 2005 for companies. Failure to do so may invalidate insurance cover and building fire certification under the control of the local fire officer.
  • It is essential that the structural surround to the opening has a fire rating of at least the equivalent to the fireguard product specified and is sufficient for fixings to ensure fully compliant installation.

Digital objects
PlatformCompatibleVersionCertified to
IFC
IFC2X3 1 1.3
Revit
Revit 2015 2 1.3
Download now from NBS National BIM Library
Literature