Fillcoat Fibres
A waterproofing finish for roofs, non-walkable terraces, gutters, ridges, chimneys etc, based on solvent soluble high polymers.
The Fillcoat Fibres system is designed to be instantly waterproof, have 1300% elasticity and to provide excellent resistance against weather and mineral acids. It is not resistant to solvents and alkaline substrates. It does not contain bituminous products and has excellent adhesion on different substrates.
Preparation:
Remove dust, mud, grease, moss and leaves carefully. Areas to be repaired are cleaned with a hard broom and sponged. In case of repeatedly repaired areas, major or active cracks, apply Fillcoat Fibres crosswise over the cracks or fissures. After cleaning, Fillcoat can be applied directly on bituminous substrates, hard PVC, polyester, zinc, aluminium, glass, tiles.
Uniclass 2015 | |
CAWS | J31/5 Cold deck roof coating J31/110 Cold deck roof coating |
Product Reference | Fillcoat Fibres |
Primer | Not requiredPrimer No 44 diluted with 30% Thinner No 22 |
Coating application | 1 coat Fillcoat Fibres, brush or roller applied |
Rate of application | 1.5 litres/m² |
Minimum dry film thickness | 430 micrometres |
Colour | Dark grayLight gray |
Standard product features | Density (ASTM D1475, 20°C): 1.01–1.04 g/cm³. Drying time 20°C:
Actual drying times are dependent on relative humidity, temperature and composition of the material. Flashpoint (DIN 53213): 30°C - Flammable. Solids content (ASTM D1644/a): 1.01–1.04 g/cm³. |
Product Options | Primer: Porous materials (concrete, stone, wood) must first be dried and pre-treated with Primer No 44 diluted with 30% Thinner No 22. Reinforcement: Dakfill Fleece embedded into first coat if required. Coating colour: A range of two standard colours. For other colours please contact Rust-Oleum UK Ltd. |