Lining system on adhesive dabs based on Fermacell Gypsum Fibreboard.

General information

Uniclass 2015

Ss_25_25_45_35 Gypsum board wall lining systemsPrimary


K10/185 Wall lining system (adhesive)

Specification data - Gypsum board wall lining systems

Product Reference

Fermacell 3TP01 Wall Lining on Adhesive Dabs


10 mm

12.5 mm


Not required

Fermacell Fine Surface Treatment (FST)

Joint treatment

Fermacell Joint Reinforcement Tape and Fermacell Joint Filler

Taper edge boards.

Vapour barrier

Not required


Standard product features


10 mm or 12.5 mm tapered edge Fermacell.

Recycled content:

Best Fermacell gypsum fibreboard contains 100% recycled content. All by-products recyclable.

Other requirements:

  • Apply dabs to Fermacell Boards prior to fitting to walls.
  • Board control joint to match movement joint in main structure.
  • Ensure substrate is clean and primed as necessary to receive adhesive dabs.
  • Two mechanical fixings through to main background at top of board once adhesive cured.

Fire stopping around service penetrations. Frame out openings with the same number of layers of board as per above specification. Sockets backed using baffle boxes, intumescent putty pads or suitable rock mineral wool, sufficient to maintain the fire/acoustic performance.

Movement joints are required at maximum 8 linear metre intervals.

Provide door reinforcement as required to suit door weights and opening size. Ensure no vertical joints at door jambs.

Offset all board joints by minimum 200 mm.

Environmental information

Recycled content

Best Fermacell gypsum fibreboard contains 100% recycled content. All by-products recyclable

Third party certifications
  • 90/2439
  • ETA
  • ECO Institute
Similar products from James Hardie Building Products Ltd