BBA Agrément Certificate
Suspended ceiling system with 30 minutes fire resistance.
Suspended ceiling system with two layers of Fermacell Gypsum Fibreboard.
K10/220 Proprietary suspended ceiling system
K10/50 Suspended ceiling on metal framing
Fermacell 2S11 UO Suspended Ceiling System
Secondary grid centres
Two layers 10 mm Fermacell
Two layers 12.5 mm Fermacell
Fermacell Fine Surface Treatment (FST)
Fermacell Jointstik 1 mm glued joint
Square edged boards.
Fermacell Joint Filler 5–7 mm filled joint
Site cut boards.
Fermacell Joint Reinforcement Tape and Fermacell Joint Filler
Taper edge boards. N.B When using Tapered Edge Boards, first layer must be a Square Edge Board, for double layer systems.
Standard product features
30 mm Fermacell screws at 300 mm centres and 40 mm Fermacell screws at 200 mm centres.
Insulation (minimum density):
40 mm mineral wool: 30 kg/m³.
MF system to manufacturer's specification.
Best Fermacell gypsum fibreboard contains 100% recycled content. All by-products recyclable.
Fire stopping around service penetrations. Frame out openings with the same number of layers of board as per above specification. Sockets backed using baffle boxes, intumescent putty pads or suitable rock mineral wool, sufficient to maintain the fire/acoustic performance.
Movement joints are required at maximum 8 linear metre intervals.
Refer to manufacturer's literature. Vapour barrier as required for high humidity areas.
Offset all board joints by minimum 200 mm.
Best Fermacell gypsum fibreboard contains 100% recycled content. All by-products recyclable
Fermacell 2FCH21 Timber Party Floor-Ceiling Solution
Fermacell 2H12 Ceiling Lining on Timber Battens or Steel Profiles
Fermacell 2H13 U Ceiling Lining on Timber Battens
Fermacell 2HD11 Roof Lining on Timber Battens
Fermacell 2S01 H2O Suspended Ceiling System
Fermacell 2S11 H2O UO Suspended Ceiling System
Fermacell 2S11U suspended ceiling system
Fermacell 2S21u Suspended Ceiling System