A range of 60 minute, fire rated, 54 mm thick face finished internal flush doors.
A range of single or double doors, unequal pairs and matched overpanels – all of which are suitable for fitting into timber or steel frames. Face finished with totally bespoke hand crafted real wood veneers or commercially available decorative laminates, Forza doors and panels will, when installed, be a perfect partner with other chosen finishes to complete a totally co-ordinated project design.
Forza FD60 doors are approved under IFC Field of Application report PAR/10896/01 for use within Timber or steel frames utilized in the UK interior fit-out construction industry.
Each Forza fire door carries a unique IFCC tamper- evident label that identifies its audit trail of manufacture and affirms its fire characteristics.
L20/410 Wood doorsets
60 minutes to BS 476-22: 1987.
60 minutes to BS 476-22: 1987 and cold smoke control to BS 476-31.1.
A – Single leaf
B – Double equal leaves
C – Double unequal leaves
D – Single leaf and overpanel
E – Double equal leaves and overpanel
F – Double unequal leaves and overpanel
G – Single leaf and glazed fan light
H – Double equal leaves and glazed fan light
I – Double unequal leaves and glazed fan light
J – Single leaf and sidelight(s)
K – Double equal leaves and sidelight(s)
L – Double unequal and sidelight(s)
High Pressure Laminate
PVC, high impact
Two coats high solid UV cured lacquer; clear/ 30% gloss/ other. Insert requirements.
Finished with one coat high solid UV clear lacquer, 30% gloss.
Forza primed coat (FPC) for painting by others.
Insert colour required – finished with two coats high solid UV clear lacquer, 30% gloss.
Consult manufacturer for further details.
Minimum density: 640 kg/m³.
Minimum density: 700 kg/m³.
Stainless steel, grade 304 or 316
Frame face width minimum 40 mm, including 12 mm stop. Minimum depth: 100 mm.
Two coats of clear/ tinted lacquer, 20% gloss/ other – insert requirements. Timber frames only.
One/ two coats for paint finishing by others. Timber frames only.
Insert colour required, finished with two coats of high-solid acid-catalysed lacquer. Timber frames only.
Steel frames only.
Single aperture: 450 x 450 mm (h x w).
Single aperture: 600 x 150 mm (h x w).
Single aperture: 1500 x 150 mm (h x w). Complies with Building Regulations Approved Document K 2013 for minimum zones of visibility.
Three apertures: 150 x 150 mm (h x w).
Two apertures: Top, 700 x 150 mm (h x w), lower 600 x 150 mm (h x w). Complies with Building Regulations Approved Document K 2013 for minimum zones of visibility.
Five apertures: 150 x 150 mm (h x w).
Circular aperture: 450 mm diameter.
Two apertures: Top 600 x 150 mm(h x w), lower 300 x 150mm (h x w). Complies with Building Regulations Approved Document K 2013 for minimum zones of visibility.
Two apertures :Top 600 x 530 mm (h x w), lower 300 x 530mm (h x w). Complies with Building Regulations Approved Document K 2013 for minimum zones of visibility.
Clear fire glass
Wired fire glass
Cloak (Hockey stick)
Standard product features
Door leaf core:
Three layer wood particleboard high performance door core conforming to BS EN 312-2 (Type P2).
Composition L softwood (Spruce, Pine, Larch) with hardwood (Birch, Chestnut) and sawmill residue/ recycled wood fibre.
Types D, E, F, G, H and I are unavailable in steel frame.
Concealed/ exposed near match timber hardwood lipping to all four edges before/ after applying face finish. Minimum standard finished 9 mm square with 2 mm aris/ radius for double action/ standard 12 x 12 mm rebate from 18 mm lipping.
Wood veneer facings:
A wide range of veneers are available, offering a variety of cuts, grain directions and layon matching, including:
Consult manufacturer for further details.
Vision panels are suitably fitted with glass to provide non-fire, FD60/0 ,FD60/30 and acoustic performance. Other more project specific styles such as half oval or triangles are also available.
Standard beads are cloak ‘hockey stick’ and flush ‘quirk’ styles but project specific designs can be manufactured as required. All beads are chosen to complement the face veneer or laminate and are suitably either lacquered, painted or primed for paint. Steel or aluminium cover beads are also available for certain vision panel designs.
Factory fitted to leaf(s)/ frame, PVC cased intumescent/ smoke/ acoustic seals to manufacturer's choice to meet fire and smoke control and sound insulation as specified in applicable test report or assessment (combined seals permitted).
Product can be manufactured to a maximum of 40 dbRw – consult manufacturer for details.
FD120 Timber Internal Flush Doorset
FD30 Double Door Flush Frame
FD30 Double Door Flush Frame - Vision Panel 1
FD30 Double Door Flush Frame - Vision Panel 2
FD30 Double Door Flush Frame - Vision Panel 3
FD30 Double Door Flush Frame - Vision Panel 4
FD30 Double Door Flush Frame - Vision Panel 5
FD30 Double Door Flush Frame - Vision Panel 6
FD30 Double Door Flush Frame - Vision Panel 7
FD30 Single Door Flush Frame