QA Certificate
Certificate type
A range of 30 minute, fire rated, 44 mm thick face finished internal flush doors.
A range of single or double doors, unequal pairs and matched overpanels – all of which are suitable for fitting into aluminium, timber or steel frames. Face finished with totally bespoke hand crafted real wood veneers or commercially available decorative laminates, Forza doors and panels will, when installed, be a perfect partner with other chosen finishes to complete a totally co-ordinated project design.
Fire performance:
Forza FD30 doors are approved under IFC Field of Application report PAR/10321/01 for use within aluminium , timber or steel frames utilized in the UK interior fit-out construction industry.
Each Forza fire door carries a unique IFCC tamper- evident label that identifies its audit trail of manufacture and affirms its fire characteristics.
Uniclass 2015 | |
CAWS | L20/410 Wood doorsets L20/480 Doorsets L20/55 Doorsets |
Product Reference | FD3030 minutes to BS 476-22: 1987. FD30S30 minutes to BS 476-22: 1987 and cold smoke control to BS 476-31.1. |
Type | A – Single leafB – Double equal leavesC – Double unequal leavesD – Single leaf and overpanelE – Double equal leaves and overpanelF – Double unequal leaves and overpanelG – Single leaf and glazed fan lightH – Double equal leaves and glazed fan lightI – Double unequal leaves and glazed fan lightJ – Single leaf and sidelight(s)K – Double equal leaves and sidelight(s)L – Double unequal and sidelight(s) |
Facings | - |
Type | High Pressure LaminatePVC, high impactWood veneerInsert species. |
Finish/Colour | LacqueredTwo coats high solid UV cured lacquer; clear/ 30% gloss/ other. Insert requirements. Limed washFinished with one coat high solid UV clear lacquer, 30% gloss. Primed onlyForza primed coat (FPC) for painting by others. Stained, colourInsert colour required – finished with two coats high solid UV clear lacquer, 30% gloss. |
Lippings | ConcealedExposed |
Frame | - |
Profile | Consult manufacturer for further details. |
FrameMaterial | Aluminium, grade 6063-t6Frame face width minimum 42 mm, including 12 mm stop. Minimum depth: 85 mm. HardwoodMinimum density: 450 kg/m³. MDFMinimum density: 700 kg/m³. SoftwoodMinimum density: 450 kg/m³. Stainless steel, grade 304 or 316Frame face width minimum 40 mm, including 12 mm stop. Minimum depth: 100 mm. |
Finish/ Colour | LacqueredTwo coats of clear/ tinted lacquer, 20% gloss/ other – insert requirements. Timber frames only. Primed onlyOne/ two coats for paint finishing by others. Timber frames only. Stained, colourInsert colour required, finished with two coats of high-solid acid-catalysed lacquer. Timber frames only. Manufacturer's standardSteel/ aluminium frames only. |
Vision panels | - |
Type | V1Single aperture: 450 x 450 mm (h x w). V2Single aperture: 600 x 150 mm (h x w). V3Single aperture: 1500 x 150 mm (h x w). Complies with Building Regulations Approved Document K 2013 for minimum zones of visibility. V4Three apertures: 150 x 150 mm (h x w). V5Complies with Building Regulations Approved Document K 2013 for minimum zones of visibility. V6Five apertures: 150 x 150 mm (h x w). V7Circular aperture: 450 mm diameter. V8Two apertures: Top 600 x 150 mm(h x w), lower 300 x 150mm (h x w). Complies with Building Regulations Approved Document K 2013 for minimum zones of visibility. V9Two apertures :Top 600 x 530 mm (h x w), lower 300 x 530mm (h x w). Complies with Building Regulations Approved Document K 2013 for minimum zones of visibility. |
Glass | Clear fire glassWired fire glass |
Beading | Cloak (Hockey stick)Flush (Quirk) |
Ironmongery | As schedule |
Standard product features | Door leaf core: Three layer wood particleboard high performance door core conforming to BS EN 312-2 (Type P2). Composition L softwood (Spruce, Pine, Larch) with hardwood (Birch, Chestnut) and sawmill residue/ recycled wood fibre.
Performance:
|
Product Options | Lippings: Concealed/ exposed near match timber hardwood lipping to all four edges before/ after applying face finish. Minimum standard finished 9 mm square with 2 mm aris/ radius for double action/ standard 12 x 12 mm rebate from 18 mm lipping. For HPL and PVC face finish: Laminate or 2 mm PVC/Abs edge applied to timber lipping. Wood veneer facings: A wide range of veneers are available, offering a variety of cuts, grain directions and layon matching, including:
Consult manufacturer for further details. Vision panels: - Type: Vision panels are suitably fitted with glass to provide non-fire, FD30/0,FD30/30 and acoustic performance. Other more project specific styles such as half oval or triangles are also available. - Beading: Standard beads are cloak ‘hockey stick’ and flush ‘quirk’ styles but project specific designs can be manufactured as required. All beads are chosen to complement the face veneer or laminate and are suitably either lacquered, painted or primed for paint. Steel or aluminium cover beads are also available for certain vision panel designs. Perimeter seals: Factory fitted to leaf(s)/ frame, PVC cased intumescent/ smoke/ acoustic seals to manufacturer's choice to meet fire and smoke control and sound insulation as specified in applicable test report or assessment (combined seals permitted). Sound insulation: Product can be manufactured to a maximum of 35 dbRw – consult manufacturer for details. |
Platform | Compatible | Version | Certified to |
---|---|---|---|
![]() | - | 1 | 2.1 |
![]() | - | 1 | 2.1 |
FD120 Mineral Core Internal Flush Door Assembly
FD120 Timber Internal Flush Doorset
FD30 Double Door Flush Frame - Vision Panel 1
FD30 Double Door Flush Frame - Vision Panel 2
FD30 Double Door Flush Frame - Vision Panel 3
FD30 Double Door Flush Frame - Vision Panel 4
FD30 Double Door Flush Frame - Vision Panel 5
FD30 Double Door Flush Frame - Vision Panel 6
FD30 Double Door Flush Frame - Vision Panel 7
FD30 Single Door Flush Frame