Mechanical smoke and heat extract ventilation system.
A system to provide smoke and heat extract ventilation in accordance with BS 7346-4 and to comply with Building Regulations. Suitable for commercial and residential applications. CE Marked and compliant to European Regulations.
Tested to EN 12101-2.
The OSLoop Control System continuously monitors all components within the SHEVTEC® system for their status. Should any component device develop a fault then this will be indicated on the relevant manual control point via a yellow LED. Audible warnings can also be initiated. For centralised indication of status and faults (for example in a designated Fire Fighters entrance) the SHEVTEC® Repeater Panel should be used. The OSLoop system includes real-time event logging. This enables the system to indicate when maintenance is required and gives the maintenance engineer full diagnostics if required.
Mechanical Smoke Shaft System
SHEVTEC® Smoke Shaft Door Actuator and Door
SHEVTEC® Powered Extract Fan
Manual control point (MCP)
Open/ close switches
|24 V Controllers|
OS loop coordinator
OS2 control panel
SHEVTEC® Repeater Panel
SHEVTEC® Smoke Shaft Floor Grille
SHEVTEC® dampers and smoke shaft door actuator and door described in U14 products.
SHEVTEC® fans described in U14 products.
- SHEVTEC® Repeater Panel:
Provides system status information for each vent within a smoke ventilation system, as described in section U14.
- Smoke shaft floor grille:
Safety grilles to facilitate maintenance access with the smoke shaft can be provided and SE Controls will carry out the structural calculations for the applications required.
© 2020 NBS Enterprises Ltd. All rights reserved.