NBS Source
List your products
Description

Everdry is a stepped cavity tray system. This product with a lead flashing is for stonework construction of regular 150 mm course heights, at the abutment of roofs, (having a pitch of 15° or greater) with cavity walls having a cavity width between 50 mm and 125 mm and with an external leaf thickness of 125 mm.

Features:

  • Project specification and scheduling service available.
  • Supplied with factory fitted lead flashing ready cut to suit the pitch of the roof and type of roof covering.
  • 150 mm high back upstand exceeds minimum requirements.
  • Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework.
  • Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.
  • Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required.
  • Lengths available for roof pitches of 15°, 17.5°–22.5° and 25° or above.
  • BBA approved.

General information
Features

Project specification and scheduling service available

Supplied with factory fitted lead flashing ready cut to suit the pitch of the roof and type of roof covering

150 mm high back upstand exceeds minimum requirements

Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework

Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf

Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required

Lengths available for roof pitches of 15°, 17.5°–22.5° and 25° or above

BBA approved

Material

2 mm thick medium density polyethylene

Uniclass 2015
Preformed cavity trays (Pr_25_57_21_66)Primary
Specification data - Preformed cavity trays
Product Reference

Everdry Stepped Cavity Tray 150 mm Course Height and 125 mm Wall Thickness With Attached Lead Flashing

Location

As shown on drawings

Roof pitch

___°

15° and above.

Cavity width

___ mm

Within range 50 mm to 125 mm.

Lead length

Long

Medium to high profile tiles.

Short

Slates and low profile tiles.

Intermediate tray product code

Not required

8103

Right hand, length varies, cavity 50–74 mm.

8104

Left hand, length varies, cavity 50–74 mm.

8105

Right hand, length varies, cavity 75–99 mm.

8106

Left hand, length varies, cavity 75–99 mm.

8107

Right hand, length varies, cavity 100–125 mm.

8108

Left hand, length varies, cavity 100–125 mm.

Stop end starter tray product code

Not required

8133

Right hand, length 450 mm, cavity 50–74 mm.

8134

Left hand, length 450 mm, cavity 50–74 mm.

8135

Right hand, length 450 mm, cavity 75–99 mm.

8136

Left hand, length 450 mm, cavity 75–99 mm.

8137

Right hand, length 450 mm, cavity 100–125 mm.

8138

Left hand, length 450 mm, cavity 100–125 mm.

Corner starter tray product code

Not required

7143

Right hand, length 550 mm, cavity 50–74 mm, not supplied with factory fitted lead flashing.

7144

Left hand, length 550 mm, cavity 50–74 mm, not supplied with factory fitted lead flashing.

7145

Right hand, length 550 mm, cavity 75–99 mm, not supplied with factory fitted lead flashing.

7146

Left hand, length 550 mm, cavity 75–99 mm, not supplied with factory fitted lead flashing.

7147

Right hand, length 550 mm, cavity 100–125 mm, not supplied with factory fitted lead flashing.

7148

Left hand, length 550 mm, cavity 100–125 mm, not supplied with factory fitted lead flashing.

Ridge tray product code

Not required

8162

Length 450 mm, cavity 50–74 mm.

8163

Length 450 mm, cavity 75–99 mm.

8164

Length 450 mm, cavity 100–125 mm.

Standard product features

Material:

2 mm thick medium density polyethylene.

Attached flashings:

Code 4 milled lead.

Colour:

Black.

Similar products from Timloc Building Products

© 2020 NBS Enterprises Ltd. All rights reserved.