Everdry Stepped Cavity Tray for Blockwork (225 mm coursing/ 150 mm wall thickness/ lead)
A stepped cavity tray system for masonry construction.
Everdry is a stepped cavity tray system. This product with a lead flashing is for blockwork or stonework construction of regular 225 mm course heights, at the abutment of roofs (having a pitch of 12.5° or greater) with cavity walls having a cavity width between 50 mm and 125 mm and with an external leaf thickness of 150 mm.
Features:
- Project specification and scheduling service available.
- Supplied with factory fitted lead flashing ready cut to suit the pitch of the roof and type of roof covering.
- 150 mm high back upstand exceeds minimum requirements.
- Permanent stop end protects the perpendicular joint and cuts out water backtracking along the stonework.
- Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.
- Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required.
- Lengths available for roof pitches of 12.5°–22.5° and 25° or above.
- BBA approved.
| Features | Project specification and scheduling service available Supplied with factory fitted lead flashing ready cut to suit the pitch of the roof and type of roof covering 150 mm high back upstand exceeds minimum requirements Permanent stop end protects the perpendicular joint and cuts out water backtracking along the stonework Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required Lengths available for roof pitches of 12.5°–22.5° and 25° or above BBA approved |
| Material | 2 mm thick medium density polyethylene |
| Uniclass 2015 | |
| CAWS | F30/370 Preformed cavity trays F30/56 Preformed cavity trays |
| Product Reference | Everdry Stepped Cavity Tray 225 mm Course Height and 150 mm Wall Thickness With Attached Lead Flashing |
| Location | As shown on drawings |
| Roof pitch | ___°12.5° and above. |
| Cavity width | ___ mmWithin range 50 mm to 125 mm. |
| Lead length | LongMedium to high profile tiles. ShortSlates and low profile tiles. |
| Intermediate tray product code | Not required8205Right hand, length varies, cavity 50–74 mm. 8206Left hand, length varies, cavity 50–74 mm. 8207Right hand, length varies, cavity 75–99 mm. 8208Left hand, length varies, cavity 75–99 mm. 8209Right hand, length varies, cavity 100–125 mm. 8210Left hand, length varies, cavity 100–125 mm. |
| Stop end starter tray product code | Not required8235Right hand, length 450 mm, cavity 50–74 mm. 8236Left hand, length 450 mm, cavity 50–74 mm. 8237Right hand, length 450 mm, cavity 75–99 mm. 8238Left hand, length 450 mm, cavity 75–99 mm. 8239Right hand, length 450 mm, cavity 100–125 mm. 8240Left hand, length 450 mm, cavity 100–125 mm. |
| Corner starter tray product code | Not required7245Right hand, length 550 mm, cavity 50–74 mm, not supplied with factory fitted lead flashing. 7246Left hand, length 550 mm, cavity 50–74 mm, not supplied with factory fitted lead flashing. 7247Right hand, length 550 mm, cavity 75–99 mm, not supplied with factory fitted lead flashing. 7248Left hand, length 550 mm, cavity 75–99 mm, not supplied with factory fitted lead flashing. 7249Right hand, length 550 mm, cavity 100–125 mm, not supplied with factory fitted lead flashing. 7250Left hand, length 550 mm, cavity 100–125 mm, not supplied with factory fitted lead flashing. |
| Ridge tray product code | Not required8263Length 625 mm, cavity 50–74 mm. 8264Length 625 mm, cavity 75–99 mm. 8265Length 625 mm, cavity 100–125 mm. |
| Standard product features | Material: 2 mm thick medium density polyethylene. Attached flashings: Code 4 milled lead. Colour: Black. |
Acousdpc Vertical Cavity Stops
Acoustop Thermal and Acoustic Cavity Stop Socks
Active-guard Gas Barrier Cavity Trays
Arch Window Cavity Tray
Bulls Eye Window Cavity Tray
Everdry Stepped Cavity Tray for Blockwork (225 mm coursing/ 100 mm wall thickness/ lead)
Everdry Stepped Cavity Tray for Blockwork (225 mm coursing/ 125 mm wall thickness/ lead)
Everdry Stepped Cavity Tray for Blockwork Unleaded (225 mm coursing/ 100 mm wall thickness)
Everdry Stepped Cavity Tray for Blockwork Unleaded (225 mm coursing/ 125 mm wall thickness)
Everdry Stepped Cavity Tray for Blockwork Unleaded (225 mm coursing/ 150 mm wall thickness)