NBS Source
List your products
Description

Everdry is a stepped cavity tray system. This product with a lead flashing is for blockwork or stonework construction of regular 225 mm course heights, at the abutment of roofs (having a pitch of 12.5° or greater) with cavity walls having a cavity width between 50 mm and 125 mm and with an external leaf thickness of 125 mm.

Features:

  • Project specification and scheduling service available.
  • Supplied with factory fitted lead flashing ready cut to suit the pitch of the roof and type of roof covering.
  • 50 mm high back upstand exceeds minimum requirements.
  • Permanent stop end protects the perpendicular joint and cuts out water backtracking along the stonework.
  • Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.
  • Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required.
  • Lengths available for roof pitches of 12.5°–22.5° and 25° or above.

General information
Features

Project specification and scheduling service available

Supplied with factory fitted lead flashing ready cut to suit the pitch of the roof and type of roof covering

50 mm high back upstand exceeds minimum requirements

Permanent stop end protects the perpendicular joint and cuts out water backtracking along the stonework

Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf

Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required

Lengths available for roof pitches of 12.5°–22.5° and 25° or above

Material

2 mm thick medium density polyethylene

Uniclass 2015
Preformed cavity trays (Pr_25_57_21_66)Primary
Specification data - Preformed cavity trays
Product Reference

Everdry Stepped Cavity Tray 225 mm Course Height and 125 mm Wall Thickness With Attached Lead Flashing

Location

As shown on drawings

Roof pitch

___°

12.5° and above.

Cavity width

___ mm

Within range 50 mm to 125 mm.

Lead length

Long

Medium to high profile tiles.

Short

Slates and low profile tiles.

Intermediate tray product code

Not required

8203

Right hand, length varies, cavity 50–74 mm.

8204

Left hand, length varies, cavity 50–74 mm.

8205

Right hand, length varies, cavity 75–99 mm.

8206

Left hand, length varies, cavity 75–99 mm.

8207

Right hand, length varies, cavity 100–125 mm.

8208

Left hand, length varies, cavity 100–125 mm.

Stop end starter tray product code

Not required

8233

Right hand, length 450 mm, cavity 50–74 mm.

8234

Left hand, length 450 mm, cavity 50–74 mm.

8235

Right hand, length 450 mm, cavity 75–99 mm.

8236

Left hand, length 450 mm, cavity 75–99 mm.

8237

Right hand, length 450 mm, cavity 100–125 mm.

8238

Left hand, length 450 mm, cavity 100–125 mm.

Corner starter tray product code

Not required

7243

Right hand, length 550 mm, cavity 50–74 mm, not supplied with factory fitted lead flashing.

7244

Left hand, length 550 mm, cavity 50–74 mm, not supplied with factory fitted lead flashing.

7245

Right hand, length 550 mm, cavity 75–99 mm, not supplied with factory fitted lead flashing.

7246

Left hand, length 550 mm, cavity 75–99 mm, not supplied with factory fitted lead flashing.

7247

Right hand, length 550 mm, cavity 100–125 mm, not supplied with factory fitted lead flashing.

7248

Left hand, length 550 mm, cavity 100–125 mm, not supplied with factory fitted lead flashing.

Ridge tray product code

Not required

8262

Length 625 mm, cavity 50–74 mm.

8263

Length 625 mm, cavity 75–99 mm.

8264

Length 625 mm, cavity 100–125 mm.

Standard product features

Material:

2 mm thick medium density polyethylene.

Attached flashings:

Code 4 milled lead.

Colour:

Black.

Similar products from Timloc Building Products