BBA Agrément Certificate
A through coloured single coat render.
Euro Mix One Coat Renders consists of white limestone sands, white cement, lime and other additives, transported to the building site in either bulk silos, pre-packaged bags or sacks and are mixed on site with the addition of water. One Coat Renders are designed for use as backing coat and finishing coat in external rendering and internal plastering. They are manufactured under BSI/NSAI registered ISO 9001 Quality System and comply with the requirements of the following BSs, when used in accordance with the standards:
Materials comply with the following standards:
Remove all dust, loose material and any contamination from the background. Fill voids and deeply recessed joints so that they are level with the surrounding background. Wet down very porous and high-suction substrates 24 hours before application, taking care to avoid excessive use of water. Treat junctions between different surfaces in accordance with the recommendations of BS 5262. When spray-applied on to new brickwork or concrete blockwork, EuroMix One Coat Render does not require EuroMix High Bond Render. When the render is applied to concrete or very smooth surfaces EuroMix High Bond Render, is essential in order to provide a satisfactory key.
M20/160 Proprietary cement gauged render
M20/19 Proprietary render
EuroMix One Coat Render
18 mm total
|Standard product features|
Waterproofers are included in our mix design in accordance with manufacturers’ recommendations. Admixtures do not contain calcium chlorides.
One Coat Renders are available in any traditional mix type for hand or spray application as specified.
Apply EuroMix One Coat Render in two passes. At the first pass apply a 3-5 mm thick coating on to the prepared background. After approximately 30 minutes, apply a 10-15 mm thick coating giving a total thickness of 18 mm.
© 2020 NBS Enterprises Ltd. All rights reserved.