Factory produced, dry silo, hydraulic lime mortar.
EuroMix Hydraulic Lime Mortar is a factory produced dry silo mortar consisting of dried sands, natural hydraulic lime and additives transported to site in bulk silos, which after connection to a water and power supply can automatically produce mortar of the required consistency. Alternatively, a remote mixing station can be supplied. This enables dry material to be conveyed by compressed air directly to where it is needed before it is mixed with water. EuroMix Hydraulic Lime Mortar is also available delivered in mini silos, pre-packed 25 kg bags or 1 tonne sacks. Coloured mortar is available.
EuroMix Hydraulic Lime Mortar should be used in accordance with the Foresight Best Practice Guide (published by Donhead, 2003) and the general principles for mortar set out in BS 5628-3.
F10/10 Reclaimed brick facing brickwork
F10/110 Clay facing brickwork
F10/18 Concrete facing blockwork
F10/20 Manufactured stone blockwork
F10/215 Concrete facing brickwork
F10/230 Reclaimed brick facing brickwork
F10/25 Manufactured stone blockwork
F10/255 Concrete facing blockwork
F10/290 Manufactured stone blockwork
F10/295 Manufactured stone blockwork
F10/345 Concrete common brickwork
F10/355 Concrete common blockwork
F10/36 Concrete common blockwork
F10/5 Facing brickwork
F20/10 Rubble walling
F20/110 Rubble walling
F30/721 Natural stone sills laid in hydraulic lime:sand mortar
F30/726 Cast stone sills laid in hydraulic lime:sand mortar
F30/761 Natural stone coping units laid in hydraulic lime:sand mortar
F30/766 Cast stone coping units laid in hydraulic lime:sand mortar
F30/771 Cast stone dressings laid in hydraulic lime:sand mortar
F31/5 Designated concrete precast
Euromix Hydraulic Lime Mortar
Feebly hydraulic, designation iv, typical compressive strength at 91 days 1.0 N/mm².
Moderately hydraulic, designation iii, typical compressive strength at 91 days 2.5 N/mm².
Eminently hydraulic, designation ii, typical compressive strength at 91 days 5.0 N/mm².
No added pigments.
Variations available on request.
Standard product features
Sand to BS EN 13139, natural hydraulic lime to BS EN 459-1, calcium lime to BS EN 459-1 and pigments to BS EN 12878.
Each colour is available in three shades; light, medium and dark (54 shades + white), each represented by a number prefaced by E. Bespoke colours can be created and trial mixes supplied. Refer to CPI EuroMix for details.