Eponite GP
Application

Used to repair spalled or damaged concrete, chemical bunds, bedding pre-cast concrete beams, nosings on expansion joints, floor repairs, etc. It may also be used as a bedding mortar for paviours and slabs in critical areas where high bond and compressive strengths are required.

Description

A high strength, trowel applied, three component epoxy resin mortar, designed for rapid and permanent repairs to concrete and masonry. The mixed material is applied to a suitably prepared surface, and cures to form a durable, abrasion resistant repair.

Features/ Benefits:

  • Good workability to ensure a high standard finish.
  • Impact and abrasion resistant.
  • High bond strengths to steel and concrete.
  • Unaffected by a wide range of industrial chemicals and acids.
  • Frost resistant and impervious to water.
  • Cures under damp, cool conditions.

Applications:

Used to repair spalled or damaged concrete, chemical bunds, bedding pre-cast concrete beams, nosings on expansion joints, floor repairs, etc. It may also be used as a bedding mortar for paviours and slabs in critical areas where high bond and compressive strengths are required.

Priming:

Should be primed with Eponite Tackprimer.

General information

Uniclass 2015

Pr_20_31_53_15 Concrete repair mortarsPrimary

CAWS

C42/310 Repair mortar

Specification data - Concrete repair mortars

Product Reference

Eponite GP

Standard product features

Colour:

Light grey.

Technical properties:

  • Drying time: Hard dry: 16 hours; Full cure: 7 days.
  • Density: 2010 kg/m³.
  • Compressive strength: 72 MPa.
  • Tensile strength: 12 MPa.
  • Taber abrasion resistance: 40 mg weight loss (CS17 wheels; 1kg loads, 1000 cycles).
  • Adhesion strength (to concrete): >3.9 MPa.
  • Application temperature: 3–30°C.
  • Thermal coefficient of linear expansion: 3 x 10ˆ-5 cm/cm/°C.

Similar products from FIS Products