EPDM Downpipe Outlets (Perforated Flange)

EPDM Downpipe Outlets (Perforated Flange)

Wallbarn Ltd

Preformed shape for insertion into drainage outlets to improve waterproofing and protection. Suitable for rubber membranes. For downpipes. Perforated flange to aid bonding with adhesive.

Jump to:
+44 (0)20 8916 2222 www.wallbarn.com

Preformed shape for use with downpipes drainage holes on flat roofs. Manufactured with perforated flange to improve bond to waterproofing membrane. Flexible, tough EPDM shape is inserted into drainage hole and bonded and / or mechanically fixed to the waterproofing membrane in a sandwich application.

Outlet shape is placed onto the rubber waterproofing and bonded using adhesive. Adhesive will ooze through the perforations to achieve an over-and-under bond. A patch of waterproofing is installed above the outlet flange and fully bonded completely over the top to ensure area is watertight. Drainage outlet is protected by having additional layer and fully sealed.

A round leaf guard should be inserted into top of hole once installed. Always prime both the outlet shape and the waterproofing membrane before installation.

General information




Holes throughout the face, waterproof seal


Ethylene propylene diene monomer rubber


250 x 406 x 183 x 183 x 192 mm

Uniclass 2015

Pr_65_50_35_37 Gravity rainwater outletsPrimary
Digital objects
PlatformCompatibleVersionCertified to
- 1 2.1
Revit 2017 1 2.1
Download now from NBS National BIM Library
Similar products from Wallbarn Ltd