NBS Source
Emergency Escape Revolving Door

Application

Circular revolving doorsets suitable for commercial settings with emergency egress.

Description

Custom designed circular revolving doors with emergency egress and an internal stainless steel framework.


Constructed from welded stainless frames which are clad in your chosen finish, these doors are more than robust enough to cope with an emergency evacuation of a building. The operation can be managed via the control unit, or the system can be connected directly to the fire alarm with automatic operation.


Features and benefits:

  • Can be clad with a variety of materials to produce an attractive finish.
  • Available with three or four door leaves.
  • Diameters from 1800 mm.
  • Available with fully automatic or manual operation.
  • Designed, manufactured and installed to EN 16005.

General information

Shape

Circle

Finish

Stainless Steel

 Stainless steel with or without special finishes.

Material

Stainless steel

Glass

WarrantyDescription

Lifetime with service contract, please contact manufacturer for information.

-

Size

Bespoke sizes.

-

Uniclass

Ss_25_30_20_70 Revolving doorset systemsPrimary
Pr_30_59_24_50 Manual revolving doorsets

CAWS

L20/60 Doors

L20/495 Automatic revolving doors

L20/500 Manual revolving doors

Specification data - Revolving doorset systems Enhanced data

Doorset

-

Operation

Fully automatic revolving doorset.

Manual revolving doorset.

Hardware

Not required.

Horizontal push bar.

Vertical push bar.

Breakout facility

Required.

System accessories

Not required.

Matting.

Water Drainage Reservoir.

Heaters.

Integrated into the mat well or canopy.

Door wings

Three wing.

Four wing.

Diameter

1800–3000 mm.

Available in 1 mm increments.

Internal height

2100–9000 mm<.

Available in 1 mm increments.

Clear opening

720 mm<.

Dependent on door model and configuration.

Locking

Manual.

Automatic.

Consult the manufacturer for further details.

Security

To EN 1627, RC3; PAS24:2016 Annex B.

Canopy

50 mm<.

Canopy Prestige Doors: Available in 1 mm increments Please contact Bauporte for minimum heights if the door is automated, lighting or hot air units are required.

Laminated 18 mm glass roof inside and out.

Canopy Full Vision Doors: Exterior roof with stainless steel edging and two water drainage spouts

Power supply

Not required.

Manual.

230 V/50 Hz.

 Automatic and semi-automatic only. 

Drive unit

Not required.

Manual.

1200 x 400 x 400 mm.

Installed in the canopy.

Underfloor Drive Unit.

(Automatic and semi-automatic only).

Surface finish

Special Finishes on request.

Stainless Steel.

Aluminium.

Bronze/Copper.

Safety

Designed, manufactured and installed to EN 16005.

Drum walls

Fixed curved drum walls will be constructed from welded through stainless steel profiles, which are covered with 2 mm aluminum sheeting or chosen special finish. Glazed curved drum walls formed from clear curved 12 mm laminated glass in one piece over the full height of the door and divided by the midstyle. No bottom glazing profiles, the glazing fits directly into the floor construction.

Central post

Stainless steel connecting the top-part and bottom-part. Glass: clear flat 12 mm toughened glass.

Similar products from Bauporte Doors UK Ltd.

Circular Full Vision Revolving Door

Circular Full Vision Revolving Door

Circular Nostalgia Revolving Door

Circular Nostalgia Revolving Door

Circular Prestige Revolving Door

Circular Prestige Revolving Door

Night Wall Security Revolving Door

Night Wall Security Revolving Door

Royal Full Vision Revolving Door

Royal Full Vision Revolving Door

Royal Nostalgia Revolving Door

Royal Nostalgia Revolving Door

Royal Prestige Revolving Door

Royal Prestige Revolving Door