NBS Source
List your products
Elastobond
Application

Suitable to waterproof any building structure subject to mechanical stress and dimensional variations.

Description

High performance roofing waterproofing membrane based on a modified bituminous compound constructed from distilled bitumen and highly resilient elastomeric (thermoelastic) resin.

It is reinforced with a non-woven 'spunbond' polyester fabric that guarantees excellent mechanical performances with high puncturing resistance, good tensile strength and multidirectional elongation. The SBS elastomeric compound gives the material outstanding performance at the lowest temperatures.

The underside of Elastobond S6 and Elastobond S6 Mineral is protected by Polyflam, a special polyethylene film which melts upon torching. In the mineral version, the top surface is protected by a uniform layer of slate chippings and has a longitudinal selvedge for overlapping making application fast and secure.

Application:

Suitable to waterproof any building structure subject to mechanical stress and dimensional variations.

General information
Finish

Elastobond S6: Polyflam film both sides

Elastobond S6 Mineral: Slate upper face and Polyflam film lower face

Material

Distilled bitumen and highly resilient elastomeric (thermoelastic) resin

Uniclass 2015
Pr_25_57_08_75 Reinforced bitumen roofing sheetsPrimary
CAWS

J41/115 Single layer reinforced bitumen membrane warm deck roof covering

J41/125 Single layer reinforced bitumen membrane inverted roof covering

J41/135 Single layer reinforced bitumen membrane cold deck roof covering

J41/405 Single layer reinforced bitumen waterproof covering

Specification data - Reinforced bitumen roofing sheets
Product Reference

Elastobond S6

4 mm thickness.

Elastobond S6 Mineral, 4.5 kg/m²

Elastobond S6 Mineral, 5.0 kg/m²

Colour

Not applicable

For Elastobond S6.

Brun Bourgogne

Dark Brown

Green

Grey

Red

White

Standard product features

Material:

Distilled bitumen and highly resilient elastomeric (thermoelastic) resin.

Finish:

  • Elastobond S6: Polyflam film both sides.
  • Elastobond S6 Mineral: Slate upper face and Polyflam film lower face.

Roll size:

1 x 8 m.

Technical properties:

  • Tensile strength (to BS EN 12311-1): MD: 800 N/50mm; TD: 500 N/50mm.
  • Elongation (to BS EN 12311-1): MD: 45%; TD: 50%.
  • Tearing resistance (to BS EN 12310-1): 150 N.
  • Static puncturing (to BS EN 12730): 15 L.
  • Dynamic puncturing (to BS EN 12691): 10 I.
  • Low temperature flex (to BS EN 1109): -15°C.
  • Dimensional stability (to BS EN 1107-1): ≤0.5%.
  • Heat resistance (to BS EN 1110): 150°C.
  • Water tightness (to BS EN 1928): ≥60 kPa.
  • Water resistance (to BS EN 1928): ±2%.

Similar products from Polyglass Ltd