EHI/ EHI GF

EHI/ EHI GF

Parex Ltd Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • QA Certificate

    QA Certificate

    Certificate type

  • BSI Kitemark

    BSI Kitemark

    Certificate type

One coat breathable through coloured mineral render for use on the ParexTherm mineral insulated render system.

Jump to:
+44 (0)1827 711755 www.parex.co.uk

Description

A coloured mineral based render in powder form ready to mix with water. Available in two grades standard and fine grade to create a range of finishes. This product is intended for use with the ParexTherm mineral insulation systems to provide the final decorative and weatherproof finish.

Suitable for:

  • Exterior Insulation Façade System (EIFS) - ParexTherm mineral render system.
  • To blend in with the ParexTherm mineral system EHI/ EHI GF can be applied directly to suitably prepared masonry and concrete substrates. Contact Parex for further advice.
  • ParexDirect Mineral render system.

Unsuitable for:

Exposed facades or parts of facades at an angle of more than 5° from the vertical. A backward incline may affect water run-off and may have a tendency to hold moisture.

Finishes:

  • Fine scraped – EHI GF.
  • Medium scraped – EHI.
  • Spray textured – EHI/ EHI GF.
  • Smooth spray textured – EHI/ EHI GF.
  • Sponge float finish – EHI GF.
  • Trowel float finish – EHI GF.

For additional information on the range of finishes consult the Parex literature referenced Textured Finishes.

General information

Uniclass 2015

Pr_35_31_64_65 Polymer-modified rendersPrimary

CAWS

M20/130 Cement:sand (air entrained)

M20/160 Proprietary cement gauged render

M20/5 Cement:sand (air entrained)

M21/20 External wall insulation system . . . . . .

M21/210 External wall insulation system

Specification data - Polymer-modified renders

Product Reference

EHI

EHI GF

Thickness

Dependent upon application and desired finish - refer to product data sheet.

Accessories

None

Algirex

Axel 3000

Mesh, beads and profiles for mineral renders

Parex Profiles

Tardex

TV-10 Reinforcing Mesh

Colour

Range of 48 standard colours are available. Special colours available.

Standard product features

Pack size:

30 kg bag.

Technical characteristics:

A white powder, based on cement, hydrated lime, micronized vinyl copolymers, calcareous and siliceous sands, mineral pigments and specific admixtures.

  • MVA: 1.12 ± 0.05
  • Particle size: Refused passing through sieve at 0.08 mm – 70 to 80%. Refused passing through sieve at 1.25 mm – 10 to 25%.
  • pH powder: 12.5 ± 0.5%.
  • Water retention: 93 ± 2%.

Product Preparation:

Water ratio: 6.9–7.5 L per 30 kg bag.

Product Options

Colour:

Contact Parex Ltd for colour samples. Non-standard colours are available at no cost option and should be approved prior to ordering.

Third party certifications

  • 10/4275
  • Irish Agrément Board : 09/0342
  • European Technical Approval : 04/0124 (New 2010 approvals pending)
  • British Standards Institution (BSI) - certficate : BS EN ISO 14001 2004

Similar products from Parex Ltd

Monogris E

Monogris E

Revlane+ Taloche Fin/ Gros

Revlane+ Taloche Fin/ Gros