Application

Suitable for use on most unsealed and undecorated concrete, cellular concrete, masonry, natural stone, cement, stucco/render and brick substrates.

Description

Dulux Trade Plus SmartShield+ is an exterior waterproofing coating that has been specifically formulated to reduce water ingress into substrates without sealing the surface, helping substrates breathe and dry-out, maximizing their thermal efficiency. SmartShield+ provides invisible protection from water and freeze thaw cycle helping building exteriors maintain their natural beauty. Its low viscosity formulation enables efficient spray application across previously unsealed and undecorated substrates. It is water-based, has a low odour and is quick drying. It is suitable for use on unsealed and undecorated brick, concrete, cellular concrete, masonry, natural stone, cement, stucco/ render. It can be overcoated with masonry paints after a period of at least six months. It is not suitable for use on previously decorated or sealed surfaces.


Features and benefits:

  • Breathable, water repellent coating that helps substrates dry improving thermal efficiency.
  • Protects against rain, frost, ultraviolet (UV) and dirt for up to ten years.
  • Reduces moisture intrusion.
  • Permeable to water vapour (and highly breathable).
  • Clear coating provides invisible exterior protection.
  • Reduces risk of damage from rain and freeze and thaw cycles, helping buildings to maintain their natural beauty.
  • Algae and moss resistant due to the nature of the hydrophobic surface.
  • Water-based and quick drying.
  • Provides up to ten years durability.
  • Resistant to UV damage.
  • Recoatable with exterior masonry paints after a minimum of six months.
  • Certified by the BBA and tested by the BRE.
  • Coverage: consult manufacturer


Film properties:

  • Heat resistance: Not suitable for use on heated surfaces.
  • Water resistance: Resistant to the levels of atmospheric humidity normally experienced in exterior environments.


Technical characteristics:

  • Solids content: By weight: Approximately 7.5%; by volume: Approximately 8.2%.
  • Thinning: Ready for use, do not dilute.
  • VOC content: 3 g/L (0–0.29%).

General information

Finish

Manufacturer’s standard.

Color

Clear

Material

Water-based

Water-based liquid.

WarrantyDescription

Manufacturer’s standard.

Uniclass 2015

Pr_35_31_22_94 Water-based finishing coatsPrimary

CAWS

M60/175 Protective coating

M60/18 Special coating

Specification data - Water-based finishing coats Enhanced data

Composition

Water-borne.

Colour

Clear.

Execution

Applying coating.

Product Reference

Dulux Trade Plus Smartshield+

Capacity

10 L.

Form

Liquid.

Environmental information

Country of product manufacture

Netherlands

Literature

Third party certifications

Similar products from Dulux Trade, brand of AkzoNobel