NBS Source
DucoSun Ellips Intermediate
Compare variants

Application

Solar shading.

Description

This solar shading system is available with either fixed or electrically adjustable blades. They are installed to the support system on-site (either horizontally or vertically). This system allows for a wide variety of blade mounting angles. This ensures that the system can shade the area optimally regardless of the glazed surface and the position of the sun throughout the day.


Features and benefits:

  • The elliptical louvre blades ensure the maximum amount of diffused daylight.
  • The ellipsoid blade styles admit high levels of diffused daylight.
  • DucoSun Ellips offers architects a wide freedom of design.
  • Available in a choice of seven widths: 100, 150, 200, 250, 300, 350 and 400 mm.

General information

Color

Range of colours available in either anodized or RAL.

-

Finish

Anodized

Qualanod-compliant, coating thickness 15-20 µm, standard natural colour (clear anodising).

Powder coated

Qualicoat-compliant, minimum average coating thickness 60 µm, standard RAL colours 70% gloss.

Material

Aluminium

EN AW – 6063 T66.

Size

100 x 26 mm

150 x 35 mm

200 x 37 mm

250 x 43 mm

300 x 50 mm

Show more

WarrantyDescription

Ten years

Duco Projects provides 10-year warranty cover on Duco system materials covering potential defects in materials and surface treatment, applicable from the date 3 months after delivery or from the date of installation, whichever is the sooner.For motors and for components subject to wear as a result of movement, however, this warranty is limited to 1 year. This warranty is only valid for building projects in European countries (other countries upon request only) and provided normal use and maintenance have been observed. This warranty is on a sliding scale, reducing by 10% a year (e.g.: during the third year 80% of the claim will still be covered by this warranty). This warranty covers the supply of replacement parts on site to be fitted by the installer, or in the event of defective surface treatment, substantiated costs for pre-treating and recoating the material in question. This warranty relates exclusively to the product itself, not to its installation: accordingly, dismantling and assembly costs are not covered by this warranty. Duco Projects’ maximum liability will be exhausted with the resupply of the defective component or complete system. Under no circumstances can Duco Projects be held liable for any other tangible or intangible loss, including consequential losses. A repaired or resupplied product is covered for the remainder of the warranty period.

Uniclass 2015

Pr_30_59_09_15 Carbon steel brise-soleil unitsPrimary

CAWS

L10/670 Brises soleil

Product range

Solar Shading

Specification data - Carbon steel brise-soleil units Enhanced data

Support arms

-

Material

Aluminium.

Al Mg Si 0.5.

Finish

Anodized.

Anodized: Qualanod-compliant, coating thickness 15–20 µm, standard natural colour (clear anodizing).

Powder coated.

Powder coated: Qualicoat-compliant, minimum average coating thickness 60–80 µm, standard RAL colours with 70% gloss.

Colour

Anodized.

RAL.

Standard RAL colours 70% gloss.

Size

Maximum span: Dependent on model, louvre blades and wind load. contact manufacturer for more information.

Array louvre blades

-

Profile

Ellips-shaped.

Size

Blade width.

100 mm.

Pitch

Depends on the type of blade and the inclination.

Material

Aluminium.

Al Mg Si 0.5.

Finish

Anodized.

Qualanod-compliant, coating thickness 15–20 µm, standard natural colour (clear anodizing).

Powder coated.

Qualanod-compliant, coating thickness 15–20 µm, standard natural colour (clear anodizing).

Colour

Anodized.

RAL.

Standard RAL colours 70% gloss.

Orientation

Horizontal.

Vertical.

Inclination angle

0°.

45°.

Side plates

Standard.

Auminium sheet Al Mg 3 G22, laser-cut, 5 mm thick.

Special order.

Project-specified plates are available. Aluminium sheet Al Mg 3 G22, laser-cut, 5 mm thick.

  • Louvre blades fastened to side plate/assembly plate with M6 x 30 stainless steel A2 (DIN 7500) bolts.

Height

Blade height.

26 mm.

Digital objects

Platform Compatible Version Certified to
Revit
-

1

2.1
IFC
-

1

2.1
Download now from NBS National BIM Library

Literature

Solar Shading Brise Soleil

Solar Shading Brise Soleil

Similar products from Duco Ventilation & Sun Control NV

DucoSun 100D Framed

DucoSun 100D Framed

DucoSun 100D Intermediate

DucoSun 100D Intermediate

DucoSun 100D Overslung

DucoSun 100D Overslung

DucoSun 100D Underslung

DucoSun 100D Underslung

DucoSun 100D Vertical

DucoSun 100D Vertical

DucoSun 150CF Overslung

DucoSun 150CF Overslung

DucoSun 150CF Underslung

DucoSun 150CF Underslung

DucoSun 150CF Vertical

DucoSun 150CF Vertical

DucoSun 150D Underslung

DucoSun 150D Underslung

DucoSun 150D Vertical

DucoSun 150D Vertical