NBS Source
List your products
Application

  • Suitable when a fast set plaster is required, for example in small areas, dubbing out of uneven walls and in low temperatures down to 5°C.
  • Should be applied in accordance with BS EN 13914–2.
  • The product is compatible with most building materials but is not recommended for use over plasterboard or over walls that have a bituminous coating.
  • It can be used to fill in any large cavities in the wall to level the surface prior to full coat application.

Description

A breathable, fast-set, pre-blended plaster based on natural cement and special additives to control dampness and salt migration in walls. It has been specially developed to set faster than other types of renovation plasters. It is ideal for smaller areas or dubbing out uneven walls.

The plaster is used as part of the Dryzone System for re-plastering after Dryzone Damp-Proofing Cream or Dryrod Damp-Proofing Rods have been used to create a remedial damp-proof course.

This highly effective renovation plaster has a porous structure which controls salt migration and allows walls to dry out by evaporation. Suitable for use on salt and damp contaminated walls, it provides enhanced salt protection combined with faster set time compared with competing products.

Features and benefits:

  • Controls dampness and salt migration.
  • Fast set in two hours.
  • Breathable – allows the wall to dry naturally.
  • Natural cement base.
  • CE certified to BS EN 998-1.

Applications:

  • Suitable when a fast set plaster is required, for example in small areas, dubbing out of uneven walls and in low temperatures down to 5°C.
  • Should be applied in accordance with BS EN 13914–2.
  • The product is compatible with most building materials but is not recommended for use over plasterboard or over walls that have a bituminous coating.
  • It can be used to fill in any large cavities in the wall to level the surface prior to full coat application.

General information
Specification data - Polymer plasters
Product Reference

Fast-Set Plaster

Standard product features

Technical characteristics:

  • Appearance Grey powder.
  • Coverage at 20°C: 1 m² per bag (at 20 mm thickness).
  • Reaction to fire: Class A1.
  • Breathability: ≤15 μ.
  • Bond strength 0.2 N/mm².

Similar products from Safeguard Europe Ltd