DOWSIL™ 335 Butyl Sealant Special Black
Application

Suitable for gas-filled triple and double glazed insulating glass units (IGU) using warm-edge spacers and standard spacers manufactured from plastic, metal or combinations of both.

Description

A heat applied polyisobutylene for use as the primary seal in insulating glass in commercial and residential applications. It is suitable for high performance glazing systems, particularly where elevated temperatures are anticipated in warmer climates.

Features and benefits:

  • The special black is matched to DOWSIL™ 3362 Insulating Glass Sealant and DOWSIL™ 3363 Insulating Glass Sealant for a homogeneous colour and improved aesthetics at the glass edge.
  • Meets the requirements according to EN 1279-4.
  • Compatible with all Dow facade silicones.
  • The sealant is suitable as the primary seal in air and gas-filled double and triple insulating glass units and meets the requirements according to EN 1279 in an IG system. As valid for any other technology, a proper application and fabrication of the insulating glass unit is required.
  • Temperature resistance of DOWSIL™ 335 Special Black up to 95–100°C - no evidence of trickles or flows within the insulating glass.
  • Good physical adhesion to glass and a variety of warm edge and standard spacers.
  • Solvent-free and odourless.
  • Compatible with the DOWSIL range of neutral facade silicone materials.
  • Can be applied with common IGU butylizers.

Applications:

Suitable for gas-filled triple and double glazed insulating glass units (IGU) using warm-edge spacers and standard spacers manufactured from plastic, metal or combinations of both.

General information

Uniclass 2015

Pr_30_31_76_33 Glazing compounds and sealantsPrimary

CAWS

L40/370 Bead fixed insulating glass units

L40/371 Bead fixed insulating glass units

L40/372 Bead fixed insulating glass units

L40/380 Bead fixed insulating glass units

L40/381 Bead fixed insulating glass units

Show more
Specification data - Glazing compounds and sealants

Product Reference

DOWSIL™ 335 Butyl Sealant Special Black

Standard product features

Colour:

Special black.

Technical characteristics:

  • Composition: Polyisobutylene, non-reactive and solvent-free.
  • Consistency: Solid compound, non-slump.
  • Application temperature: 125–145°C.
  • Specific gravity (to EN ISO 1183): 1.26 g/mL
  • Corrosiveness: Non-corrosive.
  • Gas permeability (to EN 1279-4: 2018): 0.0117 g/m²·24h (0.00049 g/m²·h).
  • Water vapour permeability 2.0 mm film (to EN 1279-4: 2018): 0.05 g/m²·24h.
  • Volatile content (to EN 1279-4: 2018): ≤0.001%.
  • Melting rate (MVR, meltflow modular to ISO 1133B) for Special Black: 9–12 cm³/10 minutes.

Similar products from Dow Silicones Belgium SPRL