Hygienic GRP sliding lead lined X-ray door.
Dortek hygienic lead lined doors are manufactured from high technology engineering composites using a unique closed mould process. This creates a strong, uniform product with no seams or joins on the door surface and no voids, holes or crevices within for bacteria to harbour.
The doorset incorporates lead sheeting in a range of thicknesses. The lead lining extends through the door frames, forming an effective barrier to radiation in all directions.
The doors are free of timber and other organic materials that promote bacterial growth. This makes them ideally suited to areas requiring maximum hygiene and cleanability. Extremely strong and durable, yet light and easy to operate. The doors built-in colour is aesthetically pleasing and requires no maintenance.
Fully sealed, ultra-clean construction
Free from voids, ledges and troublesome lippings
User defined lead protection
Water and chemical resistant
Non porous and non-shedding
Will not warp, rot, swell or rust
Lightweight, strong and user friendly
Smooth non-porous gelcoat finish
[Size, Doors wider than 1425 mm have a hygienic gel coat vertical joint]; [Size, Bespoke sizes available upon request - contact manufacturer]
L20/490 Automatic doors
L20/520 Sliding doors
Dortek Hygienic Sliding GRP Lead Lined Doors
Automated with two infra-red detectors
Automated with two push buttons
Automated with two touchless sensors
See 'Options' below and insert requirements.
Aluminium, anodized with concealed lead lining
GRP with concealed lead lining
Stainless steel with concealed lead lining
200 x 300 mm
200 x 600 mm
300 x 600 mm
400 x 600 mm
Stainless steel with sloping top
Steel, polyester powder coated white with sloping top
Insert requirement, consult with manufacturer, a wide range is available.
Standard product features
40 mm thick with a 2.5 mm thick seamless hygienic glass-fibre reinforced moulded polyester facing and a 35 mm thick vermiculite board core with density 380 kg/m³ and thermal conductivity of 0.05 W/mK.
Smooth non-porous gelcoat finish.
Triple glazed lead lined laminate stepped safety glass. Positioned 165 mm (minimum) from the leading edge or centrally in width.
Anodized aluminium rail system with nylon bearings.
Internal bottom track with nylon guide.
Stainless steel lever handle both sides.
Doors wider than 1425 mm have a hygienic gel coat vertical joint.
Automated doors include a micro-processor controlled safety photo-cell with in-built safety sensor to open the door if obstructed.
Interlocking systems available. Other methods of actuation available - contact manufacturer.
Bespoke sizes available upon request - contact manufacturer.
Door leaf colour:
Bespoke colours available upon request - contact manufacturer.
Dortek Hermetic Sealing Sliding Lead Lined X-Ray Doors
Dortek Hygienic Bi-Parting Sliding Doors
Dortek Hygienic Sliding Doors
DT-A1 Hygieniglass sliding bi-parting door with fixed glazed panels
DT-A1 Hygieniglass sliding single door with fixed glazed panel
DT-A1 Hygieniglass surface sliding bi-parting door
DT-A1 Hygieniglass surface sliding single door
DT5 Hermetic sliding bi-parting door with fixed glazed panels
DT5 Hermetic sliding bi-parting glass door
DT5 Hermetic sliding single door with fixed glazed panel