Dividing Strips

The metal dividing strip is a decorative and practical dividing trim used to cover gaps and slight imperfections in floor finishes at the same height.

Suitable for use with ceramic tiles, woods and other hard floor finishes the strip will also accommodate and cover small movement between the two floor finishes.

The suitability of product to be installed must be determined if chemical or mechanical stresses are anticipated.

The profile can also be formed to provide a neat and discreet solution to the problem of protecting edges of the floor finishes in curved areas.

When using the mill finish aluminium it is important to note that adhesive and grout residue must be removed from the profile as oxidisation and discolouration will occur.

If using the brass profile then ensure a cleaning regime is undertaken to prevent oxidisation and discolouration.

General information

Uniclass 2015

Pr_35_90_43_64 Polyvinyl chloride (PVC) cove skirtingsPrimary


M40/10 Natural stone covering to

M40/110 Tiling to

M40/115 Natural stone covering to

M40/12 Mosaic to

M40/120 Mosaic to

M40/5 Tiling to

M41/110 Terrazzo tiling

M41/120 In situ terrazzo

M41/130 Precast terrazzo

M41/140 Marble tiling

Specification data - Polyvinyl chloride (PVC) cove skirtings

Product Reference


Aluminium, size (l x w x d): 2500 x 5 x 10 mm.


Aluminium, size (l x w x d): 2500 x 14 x 8 mm.


Aluminium, size (l x w x d): 2500 x 22 x 9 mm.


Stainless Steel (l x w x d): 2500 x 20 x 9 mm.

Colour/ Finish

Mill aluminium 80

EDA408 and EDA510.

Matt silver 81

EDA147 and EDA408.

Matt brass 83

EDA408 only.

Stainless steel 84

EDS209 only.

Manufacturer's standard

Similar products from Genesis Global Systems Limited