Decothane Root Resistant Base Coat
BBA Agrément Certificate
Certificate type
QA Certificate
Certificate type
A high performance polyurethane coating used as an embedment coat for the Decothane Inverted Roof waterproofing system.
Features:
- Totally seamless, single pack liquid applied membrane.
- Cold applied – eliminating the risk of fire during installation.
- High solids, VOC compliant to 2004/42/CE.
- BBA certified system.
- Highest fire ratings once installed (BROOF (t4)).
- Fast curing, develops early rain resistance.
- Excellent adhesion to most conventional substrates.
- Easy and quick application – Deco Applicator available.
- Minimal disruption and low maintenance.
- Elastic properties – tolerant of thermal movement.
- Independently tested and certified resistant to root penetration.
- Flexible, impact resistant membrane.
- Can be applied all year round above 2°C.
- Approved to ETAg 005 (Part 6).
- Single point guarantee available if installed by a Liquid Plastics Quality Assured Contractor.
Areas of use:
- Embedment coat for Liquid Plastics Inverted Roof System.
- For insulated and non-insulated roof designs.
- For new construction and refurbishment projects.
Features | Totally seamless, single pack liquid applied membrane Cold applied – eliminating the risk of fire during installation High solids, VOC compliant to 2004/42/CE BBA certified system Highest fire ratings once installed (BROOF (t4)) |
Uniclass 2015 | |
CAWS | J31/130 Inverted roof coating |
Product Reference | Decothane Root Resistant Base Coat |
Primer | Dependent on substrate requirements, contact manufacturer for further information. |
Preparatory Layer – for Inverted Roofs | Liquid Plastics Carrier Membrane fully bonded with Liquid Plastics Decostik® @ minimum 1litre/ m2 |
Coating application | - |
1st coat to all surfaces | Decothane Root Resistant Base Coat: Minimum 1.5 litre/m²Roller applied on flat surfaces – brush applied for detail work. |
Top coat to covered surfaces | Decothane Root Resistant Top Coat: 1 litre/m²Roller applied on flat surfaces – brush applied for detail work. |
Top coat to exposed surfaces | Decothane Root Resistant Detail Coat: 0.75 litre/m²Roller applied on flat surfaces – brush applied for detail work. |
Reinforcement | Reemat Premium GFM embedded in base coat |
Minimum dry film thickness – full system | 2100 micrometres |
Standard product features | Colour: Red. Drying time: 4–6 hours (20°C), 6–8 hours (10°C), 12–16 hours (2°C). Fire Resistance: External Fire Performance: External Fire Performance: When covered with inorganic ballast, the kit is considered to satisfy the external fire performance requirements without needing to be tested. [See Commission Decision 2000/553/EC]. Reaction to Fire: Euroclass F. |
Product Options | Primer: Consult Liquid Plastics for use of primer appropriate to substrate. |
BBA Agrément Certificate
06/4359
Additional certifications:
- European Technical Approval No. ETA-07/0004