A blend of solvent free epoxy resins, curing agents and graded coloured quartz aggregates to provide a hardwearing, impact and abrasion resistant decorative floor surface.
Decorscreed is a carefully selected blend of solvent-free epoxy resins, curing agents and graded coloured quartz aggregates providing a 4-6mm thick floor surface. The screed is seamless, lightly textured and slip-resistant, designed for use in a wide range of industrial and commercial environments.
Movement joints must be incorporated throughout the entire floor system.
Flexijoint suits all manner of construction methods, including crack induced/ sawn joints and pre-formed expansion joints as well as coved skirting details and other finishing requirements.
Existing surfaces must be clean, dry and free from contamination, which can prevent the effective adhesion of coatings and screeds. For heavily oil contaminated surfaces, the concrete should be shotblasted and maybe subjected to hot compressed air (HCA) followed by a holding primer of WD Bonder or WD Aquatect. Conren recommend mechanical preparation for most substrates prior to installation of epoxy resin coatings/ screeds and offer a range of primer systems to suit most situations.
Durable, seamless, slip resistant, decorative, low odour
Epoxy resin, curing agents and graded coloured quartz aggregates
All warranties provided are based on each individual project - dependant on environmental and maintenance factors
M12/10 Resin flooring
M12/110 Resin flooring
Surface finish/ treatment
Conren offers a range of primer systems to suit most situations. WD Bonder is the standard primer following mechanical preparation. WD Aquatect, water vapour suppressant/ primer should be used where the moisture content in a new concrete slab exceeds 75% RH, e.g. in fast track construction projects. WD Aquatect improves surface adhesion and bonding of the flooring system to new concrete or where the presence of a DPM is suspect.
Other colours can be formulated on request; consult manufacturer for details.