Cyclone car park induction jet fan

Colt Cyclone is a low profile, high velocity induction fan intended to control air movement in a car park or underground service area, directing polluted air and smoke towards the extract positions. It is tested and certified to EN 12101-3.

. Fans are manufactured to the ISO 9001 quality standard. It incorporates a backward curve centrifugal impeller with a high temperature external rotor motor rated at 300°C for one hour.

Features and benefits:

  • Slimline design – Only 308 mm or 252 mm deep. This reduces the required headroom in car parks and thus lowers excavation costs.
  • Certified performance - Cyclone has been exhaustively tested and certified to EN 12101-3 in accredited third party test laboratories and is CE marked. (For more details see below).
  • Durable construction – Cyclone is manufactured from hot dipped galvanized casing with the option of a polyester powder coating to any RAL colour. All fans are manufactured to the ISO 9001 quality standard.
  • Low maintenance – With the additional advantage that there is no ductwork to clean.
  • High thrust – With a higher thrust, each fan can ventilate a significantly higher floor area. This means that fewer units are required than with conventional impulse units. Fewer units mean lower cabling and control requirements as well as lower installation and maintenance costs.
  • Speed options - Suitable for either two speed or variable speed operation, depending on the application. Where the unit is inverter (variably) controlled, the amount of power consumed is reduced.

General information

Uniclass 2015

Pr_65_67_29_44 Jet fansPrimary
Specification data - Jet fans

Product Reference

Cyclone Induction Jet Car Park Ventilation Fan


Cyclone 50

Cyclone 100


Single speed

Suitable for inverter speed control.

Two speed

Full and half speed.


Pre-galvanized sheet


Polyester powder coating, RAL

Insert colour requirement.

Standard product features


Cyclone 50 and Cyclone 100 with their standard isolator fully meet the F300 time/ temperature classification of the EN 12101-3: 2002 standard, following independent tests, demonstrating that the units will operate at 300ºC for 60 minutes.


The centrifugal fan unit is housed within a low silhouette pre-galvanized steel casing assembly.

Product Options


Available in two versions, producing either 100 N or 50 N at full speed.

  • Cyclone 50: 252mm in depth.
  • Cyclone 100: 308mm in depth.

Third party certifications
  • 0086-CPD-590832. - Tested to EN 12101-3 and CE marked
Similar products from Colt International Ltd