The CW175 is targeted at projects where large expanses of glass or high wind loads are demanded
The CW175 Curtain Wall suite has been designed as a logical progression from the CW150 Curtain Wall suite. While both products are targeted at small to mid-sized curtain wall projects, the CW175 offers a higher structural performance, greater allowance for building and slab movement and the flexibility to have a full structurally glazed curtain wall.
The CW175 is targeted at projects where large expanses of glass or high wind loads are demanded. While also intended for buildings up to a nominal 10 stories high, due to its superior design it may be used on higher projects depending upon wind loads.
Key features of all Capral products is the technical expertise, thorough testing and system approach to design, the CW175 is no exception having undergone a rigorous AS4284 testing regime.
Other key features include the integration of sun shading directly into the Curtain Wall system without sacrificing structural or water performance, full structural glazing with the ability to install aesthetic external beads and a corner mullion solution.
Powder coated or anodised
Various profiles available
Various sizes available. Panel Height Minimum: 300mm Maximum: 4500mm. Panel Width Minimum: 300mm Maximum: 1500mm
Ss_25_10_20_90 Unitized curtain walling systemsPrimary
System tested to AS4284: 2008
Aluminium curtain wall frame sections
Single or double glazed see product literature
Serviceability limit state (SLS)
Pressures up to 3000Pa*
Ultimate limit state (ULS)
Pressures up to 5000Pa*
Double Glazed Options as standard (Up to 32mm). Single Glazed Options as standard (Up to 6mm with inlay bead)
The maximum recommended installation height for this suite is 10 stories with a maximum overall building height of 40m
Panel Weight Maximum: 210kg