The Capral CW116 Curtain Wall system has been designed as an economical, four-sided, structurally glazed system that is suitable for small to mid-sized projects.
Residential or commercial building curtain walls.
Tested to the requirements of AS4284, this system is ideally positioned in the market for use in small to mid-sized projects. Reaching up to 10 stories high in standard applications, it may be capable of even greater heights depending on project design and wind load pressures.
A key feature of the CW116 Curtain Wall is the inclusion of tested building and mullion brackets, allowing the CW116 to be installed as a fully tested system without having to independently engineer brackets for each project.
Another key feature is the ability to integrate sun-shading directly into the frame without sacrificing structural or water performance. Coupled with both double and single glazed capabilities this curtain wall is the ideal aluminum glazing system for your next project.
Can be selected from the standard ranges of finished from Interpon and Dulux.
Anodised or Powder coated.
Various sizes available. Maximum Recommended Sizes Panel Height 4200mm Panel Width 2300mm
Supplied by the window fabricator.
Ss_25_10_20_90 Unitized curtain walling systemsPrimary
System tested to AS4284: 2008
The maximum allowable stack joint movement in the vertical orientation has been designed at 25mm (+10mm), and the maximum allowable Split Mullion movement in the horizontal direction has been designed at 10mm (+5mm) it is the responsibility of the building designer to ensure that this movement allowance is not exceeded.
Aluminium curtain wall frame sections
Fixing of the Building Bracket to the building will need to be designed, assessed and verified by a suitably qualified engineer.
See product literature for full details
Panels and facings
U value range: 2.7 - 3.8 W/m2K dependent on design build up.
Independently engineered fins/louvres/shading devices to be attached to an optional 6mm 5083 Aluminium Bracket Plate 450 x 400mm (length as required).
For detailed mullion information please contact Capral Spec Team. This system is limited to a Panel Height of 4.2m, Panel Width of 2.3m and weight of 190kgs.
116mm x 65mm.
Max SLS: 1600pa / ULS: 4500pa / WATER: 600pa Static & 1200pa Cyclic.
Cyclonic impact testing
Mullion brackets for external shading.
Country of material origin
Country of product manufacture
Aluminium is fully recyclable.