Condair DL - Hybrid Spray / Evaporative Humidifier
Type A unit (with booster pump)
Type A unit (with booster pump)
Hybrid spray and evaporative, close control adiabatic humidifier.
Application
Suitable for close control adiabatic humidification with hygienic performance requirements.
Description
Hybrid spray and evaporative, close control adiabatic humidifier which combines spray and evaporative technologies.
Features and benefits:
- Hygienic performance.
- Reverse osmosis water treatment.
- Water softener.
- Pump and silver ionization unit to actively inhibit microbial growth throughout the humidifier.
- Touch screen control panel.
- Atomizing nozzle grid to provide accurate humidity control.
- Ceramic evaporative unit has the dual effect of removing droplets from the airstream and allowing evaporation from its porous surface, improving humidification efficiency and minimizing drain water.
- A ±2% RH control accuracy can be delivered through the use of multistage and fully modulating spray output, followed by moisture evaporation from the ceramic evaporative module.
- Variable pressure sprays allow a fully modulating output for close humidity control.
System components:
- Control panel.
- Central unit (pump and silver ion water treatment).
- Spray nozzle grid.
- Ceramic evaporative unit.
General information
Shape | Rectangle |
Color | Silver |
Size
| 800 x 500 x 250 mm Central unit, H x W x D. |
Uniclass |
Specification data - Evaporative humidifiers Enhanced data
Accessories | Not required.Water supply flushing valve.Allows water to be drained from the pipework, between the RO filter and the central pump station. In-duct humidistat.Water softener.RO water treatment system.Leak monitoring.External pipe flushing set.BMS gateway board.LonWorks or BACnet IP/ BACnet MSTP. Mounting frame for pump station and control unit.Silicon-free.Droplet eliminator.For air velocities 3–4 m/s. |
Dimensions
| Central unit: 800 x 500 x 250 mm, Control unit: 450 x 315 x 190 mm. |
Weight | Central unit: 54 kg, Control unit: 14 kg. Approximate. |
Performance | 0–1000 kg/h.
|
Pressure | 3–7 bar. Nozzle pressure. |
CapacityNozzle capacity sizes at 4 bar. | 1.5 kg/h. 2.5 kg/h. 3.0 kg/h. 4.0 kg/h. 5.0 kg/h. |
Quality | Reverse osmosis water: 0.5–15.0 μS/cm. Water quality requirement. |
NominalSupplyVoltage | 200–240 V a.c., 50–60 Hz (maximum 6 A). Supply voltage and current control unit. |
Pump control | Continuous with frequency converter. Control booster pump motor, Type A unit only. |
Power consumption | 55–65 VA. Control unit. |
Motor | Booster pump motor rating: 10 VA per 10 kg/h spray capacity (approximate), with frequency converter. Type A unit only. |
RelativeHumidityControl accuracy. | 7 steps: ±3% RH, 15 steps: ±2% RH, 31 steps: ±2% RH. |
Communication hub | Remote operating and fault indication board, Modbus RTU, BACnet IP and BACnet MSTP slave mode. |
PressureDrop | 40 Pa (approximate). At 2 m/s. |
MaximumVelocityMaximum air velocity. | 3 m/s. Without droplet eliminator. 4 m/s. With droplet eliminator. |
Filter | F7 (EU7) or better air filter quality before humidifier. |
Maximum temperature | 60°C. Recommended air temperature before humidifier. |
Literature
Condair DL Hybrid Spray & Evaporative Humidifier
Similar products from Condair Limited
Condair HP - High Pressure In-duct Humidifier
Condair JetSpray - Compressed Air & Water Spray Humidifier
Condair ME - Evaporative Humidifier / Cooler
Defensor PH15
Defensor PH28 - Mobile Humidifier
ML High Pressure In-Room Spray Humidifier