Coltair ventilation, cooling, heating and heat recovery unit

Components:

The Coltair system includes standard components, such as ducting and flanges. The number, size and location of these are project specific, therefore consultation with the manufacturer is recommended. Colt can advise on all aspects of the ventilation design.

Material:

Mostly durable aluminium, with minor parts manufactured from galvanized or stainless steel.

Volume flow:

• Size 05: 1.4 m³/s.

• Size 07: 2.8 m³/s.

• Size 09: 4.2 m³/s.

Size:

- 05:

• Active components: 800 x 800 mm.

• Duct: 520 x 520 mm.

- 07:

• Active components: 1020 x 1020 mm.

• Duct: 750 x 750 mm.

- 09:

• Active components: 1315 x 1315 mm.

• Duct: 900 x 900 mm.

Cowl:

The type of cowl is dependent on the location and application of the air handling system.

Fan:

• The axial fans are used where large air volumes must be moved against low to medium pressure.

• The centrifugal fans are used where large air volumes must be moved against medium to high pressure.

Filter:

- Type:

Dependent on the desired function of the system, such as whether heating is required or the recirculation of air.

- Size:

The available sizes of the filter unit vary greatly, depending on the type of unit and the individual application.

Either a fan or a filter can be used within the air handling system and are enclosed with a standard modular component.

Grille:

The grille air outlets are fitted with two rows of extruded aluminium louvre blades positioned at right angles to each other. The type is dependent on the amount of outlets required from the system.