NBS Source
List your products

product no longer available -

Description

A range of custom-made collapsible gates designed for underground stations, car parks, and in a wide range of commercial situations.

The gates can be top hung or bottom rolling with the optional facility to be hinged aside for locations on shop entrances, window protection and small openings where a clear width is required. Ram-raid protection is provided when both top and bottom tracks are fitted.

Gate Types:

Top hung gates:

A top hung gate should be used wherever possible due to its superior operating capabilities. Single gates up to 2500 mm high and/ or 3000 mm wide are suspended from a flat bar top track, fixed at each end; larger gates have a box type top track. The gates incorporate channel bottom tracks set into the floor.

Bottom rolling gates:

They run on a flat bar bottom track which can be folding or portable for smaller openings. Where the gate is required to hinge aside when bunched, a ‘Tee’ section top track is used. The weight of the gate is supported by pulleys at the base of the pickets.

Spearhead gates:

Generally as bottom rolling gates with pointed spearheads attached to the top of the pickets to offer climb-over protection where lintels are not available for head fixings. Pairs of gates are supplied with removable centre post and fixing stay.

General information
Size

1500 x 2000 mm

Bottom hung or spearhead (single).

3000 x 2000 mm

Bottom hung or spearhead (pair).

4000 x 4000 mm

Top hung (single).

4000 x 8000 mm

Top hung (pair).

Finish

Galvanized

Polyester powder coated

Uniclass 2015 Collapsible gate and grille sets (Pr_30_59_24_14)
Specification data
Product Reference

Collapsible Gates

Type

Bottom rolling

Spearhead gates

Top hung

Size

1500 x 2000 mm

Bottom hung or spearhead (single).

3000 x 2000 mm

Bottom hung or spearhead (pair).

4000 x 4000 mm

Top hung (single).

4000 x 8000 mm

Top hung (pair).

Arrangement

Bi-parting bunching

Single bunching - Left hand side

Single bunching - Right hand side

Finish

Galvanized

Polyester powder coated

Additional requirements

Floating gates - top hung only

Hook lock bolt

Mid bar gates for reduced centres

Parallel bunch - for limited bunch situations

Plated leading edge

Product Options

Additional requirements:

  • Floating gates - top hung only.
  • Hook lock bolt.
  • Mid bar gates for reduced centres.
  • Parallel bunch - for limited bunch situations.
  • Plated leading edge.

Literature