Cemflow Light

Designed as a light duty floor topping for upgrading and renovating new and existing internal floors. Supplied as a pre-blended dry powder designed for application between 3–6 mm or can be filled to 10 mm (in one application) to provide a finished floor for foot traffic.

Features and benefits:

  • Self-smoothing.
  • Dimensionally stable.
  • Fast drying.

The manufacturer recommends that Cemflow Light be sealed in areas where water may come into direct contact with the cured material. Cemflow Light may be sealed with Strongcoat WD water based epoxy coating, or if a matt finish is required, apply a first coat of clear Strongcoat WD followed by a coat of Strongcoat Matt Clear. Cemflow Sealer can also be used to seal the product in a commercial environment.

General information

Uniclass 2015

Pr_35_31_06_69 Quick-drying levelling screed mixesPrimary


M10/17 Proprietary polymer modified wearing screeds

M10/185 Proprietary polymer modified wearing screeds

M10/192 Proprietary self smoothing wearing screeds

Specification data - Quick-drying levelling screed mixes

Product Reference

Cemflow Light

Standard product features


Approximately 4.8 m² at 3 mm thickness.

Application thickness:

  • Unfilled: 3–6 mm.
  • Filled: 10 mm.

Compressive strength (BS EN 13892-2):

  • 1 day: > 6.0 N/mm².
  • 7 day: > 15.0 N/mm².
  • 28 day: > 30.0 N/mm².

Flexural strength (BS EN 13892-2):

  • 1 day: > 2.0 N/mm².
  • 7 day: > 4.0 N/mm².
  • 28 day: > 5.0 N/mm².

Slip resistance (BS EN 13036-4):

69 (dry); 54 (wet).

Abrasion resistance (BS EN 13892-4):

AR 1.0.


Foot traffic: 3 hours.

Similar products from Don Construction Products Ltd