NBS Source
List your products
CASEA Sudanit 300 Binder
Application

CASEA Sudanit 300 Screed is suitable for floors in homes, offices, public buildings and places exposed to similar loads. It may be applied as a levelling screed directly onto a load bearing floor, unbonded on a separating barrier (polythene) or as a floating floor and is particularly suited in conjunction with underfloor heating or cavity floors. It should be covered with a floor finish such as tiles, linoleum, parquet, cork or carpet. If a cement based adhesive or smoothing compound is required, the surface of the screed must first be sealed, using an appropriate acrylic primer/ sealer.

Description

Sudanit 300 Anhydrite Binder is a specially formulated calcium sulfate binder suitable for the production of top quality self-levelling (flowing) floor screeds, simply by blending with a suitable sand and water on site or readymix plant. CASEA Sudanit 300 Binder complies with BS EN 13454-1and is CE marked.

Benefits:

  • Sufficient open time.
  • Pumpable – high flowability.
  • Early trafficking.
  • Very low shrinkage.
  • Reduced drying times.
  • CE marked.
  • BS EN 13454-1.

Applications:

CASEA Sudanit 300 Screed is suitable for floors in homes, offices, public buildings and places exposed to similar loads. It may be applied as a levelling screed directly onto a load bearing floor, unbonded on a separating barrier (polythene) or as a floating floor and is particularly suited in conjunction with underfloor heating or cavity floors. It should be covered with a floor finish such as tiles, linoleum, parquet, cork or carpet. If a cement based adhesive or smoothing compound is required, the surface of the screed must first be sealed, using an appropriate acrylic primer/ sealer.

General information
Uniclass 2015
Pr_35_31_06_72 Ready-mixed self-smoothing calcium sulfate screedsPrimary
CAWS

M13/10 Proprietary trowelled levelling screeds

M13/120 Proprietary self smoothing levelling screeds

Specification data - Ready-mixed self-smoothing calcium sulfate screeds
Product Reference

CASEA Sudanit 300 Binder

Standard product features

Designation:

CA-C30-F7.

Technical characteristics (to EN 13813: 2002):

  • Maximum thickness: 90 mm.
  • Minimum thickness: Bonded, 20 mm. Unbonded, 30 mm. Domestic, 35 mm. Commercial, 40 mm. Over underfloor heating pipes: 25 mm (BS 8204-7).
  • Use: Internal.
  • Compressive strength (28 days): >25 N/mm².
  • Flexural strength (28 days): > 5 N/mm².
  • Tensile adhesion: > 1.5 N/mm².
  • Shrinkage (28 days): < 0.1%.
  • Hardening time (before foot traffic): 8–12 hours.
  • Recommend water content: 14–16%.
  • Reaction to fire: A1 non-combustible.
  • Thermal conductivity: 1.6 W/mK.

Similar products from SMET Building Products Ltd