NBS Source
I'm a manufacturer

Carlisle SureSeal EPDM Tanking Membranes

Verified by manufacturer over a year ago

Flex-R

BBA approved EPDM reinforced and non-reinforced tanking membranes.

Jump to:
01494 448792 Website

Description

BBA approved EPDM (Ethylene-Propylene Diene Monomer) reinforced and non-reinforced tanking membranes, available in a range of sheet sizes, thicknesses and lengths. The membranes are UV stable to enable continuous waterproofing from below to above ground, without the need for further coatings or protection.

They can be either bonded or mechanically fixed and are suitable for use as damp-proofing or waterproofing membranes for solid concrete floors, underground structures and for internally and externally applied tanking below ground.

Features:

  • Fleeceback membrane gives a 28% increases in puncture resistance.
  • Provides an effective barrier to the transmission of moisture.
  • Restricts ingress of radon, methane and carbon dioxide.

General information

Uniclass

Pr_25_57_51_66 Polymeric membranesPrimary

CAWS

J40/297 Waterproofing/ damp-proofing/ gas-retardant membrane

Product range

RubberBond FleeceBack

Specification data - Polymeric membranes

Product Reference

Carlisle Sureseal EPDM Tanking Membranes

Thickness

1.14 mm

Guidance for specification option:

Non-reinforced.

1.52 mm

Guidance for specification option:

Non-reinforced.

2.29 mm

Guidance for specification option:

Non-reinforced.

2.54 mm

Guidance for specification option:

Reinforced Fleeceback EPDM membrane.

Width

1.52 m

3.05 m

6.10 m

Guidance for specification option:

Not available with Fleeceback EPDM membrane.

4.15 m

Guidance for specification option:

Not available with Fleeceback EPDM membrane.

9.15 m

Guidance for specification option:

Not available with Fleeceback EPDM membrane.

15.25 m

Guidance for specification option:

Not available with Fleeceback EPDM membrane.

Length

12.20 m

15.25 m

30.50 m

Guidance for specification option:

Not available with Fleeceback EPDM membrane.

Accessories

None

Bonding Adhesive

Guidance for specification option:

For adhered membrane applications.

HP-250 Primer

Guidance for specification option:

For cleaning jointing seams.

Lap Sealant

Guidance for specification option:

For lap joints at details.

Pressure-Sensitive SecurTAPE

Guidance for specification option:

For splicing joints.

RUSS strip

Guidance for specification option:

For securing the membrane within overlap joints on mechanically fastened membrane applications.

Splice Cleaner

Guidance for specification option:

For cleaning lap joints at details.

Splicing Cement

Guidance for specification option:

For bonding laps between EPDM sheets.

Termination Bar

Guidance for specification option:

For securing the membrane within overlap joints on mechanically fixed membrane applications.

Water Cut-Off Mastic

Guidance for specification option:

Used in conjunction with Termination bars or RUSS strips on mechanically fixed membrane applications.

Standard product features

Colour:

Grey/ black.

Elongation (to BS 903-A2):

  • Control: 450%.
  • Heat aged: 280%.

Tensile strength:

  • Control: 11.3 MPa.
  • Heat aged: 11.6 MPa.

Water vapour permeability (to BS 3177):

0.3 g/m²/day.

Product Options

Thickness:

The Fleeceback membrane incorporates a non woven polyester fleece backing and has FAT (Factory Applied Tape) technology for improved seam strength and installation speed.

Similar products from Flex-R

FleeceBack EPDM

FleeceBack EPDM

© 2024 NBS Enterprises Ltd. All rights reserved.