NBS Source
I'm a manufacturer

Description

The Eagle cantilever sliding gate is designed to suit either an industry standard motor and drive or a bespoke Eagle PLC control system. The cantilever gate allows the system to open and close without the need of a track, thus eliminating any height restrictions and large tracks in the road.

Operation:

On entrance activation, the sliding gate opens in a quick but safe sliding action. On approaching the gate from the inside, a vehicle will drive over an internal safety/exit loop. Traffic lights, if installed, indicate the gates are about to move and go green when safe to enter or exit. The gate stays open and then closes after all the safety devices are clear and/or after a set time. An anti tail-gating function can be enabled to control traffic flow.

Features:

  • Low maintenance with minimal moving parts.
  • Smooth and quiet operation.
  • Trackless design, no height restrictions and lower maintenance.
  • Very secure, with an opening and closing speed of 150 mm/ second or a high speed unit available at 400 mm/ second.
  • Zinc phosphate and powder coated finish.

General information

Size

-

Manufacturer guidance

[Size, Typically, the height of the gate is 2400 mm but can be designed to unique requirements with the manufacturer's in house design team]

Uniclass

Pr_30_59_59_79 Sliding vehicular barriersPrimary

CAWS

Q40/45 Gates

Q40/560 Steel

Q40/570 Gates

Q41/190 Vehicle access point barriers

Q50/120 Steel gate

Q50/130 Gate

Q50/15 Steel gate

Q50/20 Gate

Specification data - Sliding vehicular barriers

Product Reference

EAGCSLG001

Colour

RAL

Guidance for specification option:

Insert colour requirement.

Operation

3 phase motor

24 V motor

Speed

Manufacturer's standard

Guidance for specification option:

175 mm/second.

High speed

Guidance for specification option:

400 mm/second.

Access control

Automatic Number Plate Recognition (ANPR)

Card reader

Digital keypad

Radio control system

Push button control

Gate infill

Not required

Acoustic solid

Bar

Bar and Weldmesh

Ornate

Palisade

Perforated steel sheet

Weldmesh

Special order

Guidance for specification option:

Insert requirements.

Top protection

Not required

55 mm serrated edge

Barbed tape

Barbed wire

Long blunted spikes

Palisade struts

Rotating serrated edge on a revolving tube

Rotating spikes

Accessories

None

Signage

Traffic lights

Standard product features

Construction:

Manufactured from 50 x 50 mm carbon steel box section, 100 mm bottom rail with 25 mm bars spaced at approximately 100 mm intervals.

Posts:

400 x 200 mm square posts.

Drive and controls:

  • 240 V 16 A supply.
  • Anti tail-gating option.
  • Heavy duty cantilever rolling gear to suit the size and weight of gate.
  • PLC design with frequency invertor speed control.
  • The gate is supported on posts with high quality bearings and rollers to reduce noise and vibration.

Safety:

  • Complies with gate safety standard BS EN 13241-1.
  • Hi/Lo safety photocells.
  • Manual release in the event of power failure.
  • Protected with CAT3 safety edges.
  • Safety loops.

Product Options

Size:

Typically, the height of the gate is 2400 mm but can be designed to unique requirements with the manufacturer's in house design team.

Literature

PAS 68 Cantilever Sliding Gate INTERREGATOR

PAS 68 Cantilever Sliding Gate INTERREGATOR

PAS 68 Swing Gate CHALLENGER (40mph)

PAS 68 Swing Gate CHALLENGER (40mph)

Similar products from Eagle Automation Systems Ltd

Bi-Folding Trackless Speed Gate

Bi-Folding Trackless Speed Gate

PAS68 Bi-Folding Speed Gate

PAS68 Bi-Folding Speed Gate

PAS68 Cantilever Sliding Gate

PAS68 Cantilever Sliding Gate