Cantilever sliding gate.
The Eagle cantilever sliding gate is designed to suit either an industry standard motor and drive or a bespoke Eagle PLC control system. The cantilever gate allows the system to open and close without the need of a track, thus eliminating any height restrictions and large tracks in the road.
On entrance activation, the sliding gate opens in a quick but safe sliding action. On approaching the gate from the inside, a vehicle will drive over an internal safety/exit loop. Traffic lights, if installed, indicate the gates are about to move and go green when safe to enter or exit. The gate stays open and then closes after all the safety devices are clear and/or after a set time. An anti tail-gating function can be enabled to control traffic flow.
Low maintenance with minimal moving parts
Smooth and quiet operation
Trackless design, no height restrictions and lower maintenance
Very secure, with an opening and closing speed of 150 mm/ second or a high speed unit available at 400 mm/ second
Zinc phosphate and powder coated finish
Q40/45 Gates/ Gate posts
Q41/190 Vehicle access point barriers
Q50/120 Steel gate
Q50/15 Steel gate
Insert colour requirement.
3 phase motor
24 V motor
Automatic Number Plate Recognition (ANPR)
Radio control system
Push button control
Bar and Weldmesh
Perforated steel sheet
55 mm serrated edge
Long blunted spikes
Rotating serrated edge on a revolving tube
|Standard product features|
Manufactured from 50 x 50 mm carbon steel box section, 100 mm bottom rail with 25 mm bars spaced at approximately 100 mm intervals.
400 x 200 mm square posts.
Drive and controls:
Typically, the height of the gate is 2400 mm but can be designed to unique requirements with the manufacturer's in house design team.