A coloured, rigid epoxy, protective waterproofing and wearing surface for intermediate car park decks and ramps.
Sikafloor® - 161 is a two component, solvent free, moisture tolerant epoxy resin primer binder for most Sikafloor systems.
Suitable areas of application:
Features and benefits:
The cementitious substrate should be sound and of sufficient compressive strength (minimum 25 N/mm²) and pull off strength (minimum 1.5 N/mm²). The surfaces must be dry and free of all contaminants, e.g. oils, grease, surface treatments and coatings, etc. The substrate must be prepared mechanically to achieve an open textured fine gripping surface, free of cement laitance. Weak concrete should be removed and surface defects such as blowholes and voids must be fully exposed. All dust, loose and friable material must be completely removed, preferably by brush and vacuum, from all surfaces before application of the coating. Prior to application, confirm substrate moisture content.
M12/10 Resin flooring
M12/110 Resin flooring
Contact manufacturer for range and to obtain samples.
Standard product features
Apply Sikafloor® - 161 to the surface at a minimum consumption rate of 0.4 kg/m2. Sikafloor® - 161 can be applied onto substrates with a surface moisture content of up to 6% pbw measured using the Sika® - Tramex meter (at the time of application).
Broadcast with 0.6-1.2mm Quartz Aggregate @ consumption of ca. 4-6 kg/m2 to achieve the desired slip resistance (If necessary, different aggregate may be used in order to fulfil the client’s specific requirements).
Approximately 2–4 mm.