Bituthene® Liquid Membrane

Description

Designed to complement sheet systems where liquid applied waterproofing is necessary to ensure watertight continuity. The compound cures to form a tough seamless rubber-like waterproof layer, suitable for pile terminations, pipe penetrations, membrane continuity through masonry, internal corners and difficult details.

Bituthene® Liquid Membrane should preferably be applied prior to the installation of the waterproofing membrane. It can also be used as a pointing surface sealer. It is compatible with dry Primer B1 and B2 and the compound used on all Bituthene® and Preprufe® systems.

Substrate:

Cementitious or Masonry substrates. Surfaces shall be dry and free from dust, dirt, grease and other contaminants.

General information

Uniclass 2015

Pr_35_31_68_16 Cold-applied bitumen solutionsPrimary

CAWS

J30/10 Cold applied damp proofing

J30/110 Cold applied tanking . . . . . .

J30/130 Cold applied damp proofing . . . . . .

Specification data - Cold-applied bitumen solutions

Product Reference

Bituthene® Liquid Membrane

Primer

Not required

Coating application

-

Type

1 coat

Minimum

2.5

Standard product features

Blinding, Primer, Reinforcement:

Not required.

Product Options

Application:

Apply with a serrated trowel or float, solid barrel gun or hand held squeegee to achieve minimum thickness. Allow to cure for 24 hours before being overlapped by sheet membranes.