Bell-shaped traffic bollards.
Furnitubes Bell® bollard is the original and only traffic bollard that can solve multiple traffic management problems and is proven to save lives. The BELL 100 bollard is a simple yet effective solution to potential vehicle damage and costly repair. Following an extensive study of lorry wheels and undercarriages, a design was created to enable the deflection of a vehicle’s wheels, whilst itself remaining firmly in place and undamaged. The bollard’s profile is designed to encourage a vehicle’s tyres initially to mount its lower curve. By increasing the slope-angle of the bollard above this point, any attempt by the vehicle to rise further is prevented by deflecting the tyre sharply away.
Bell bollards can provide a stable vehicular barrier, as even high axled lorries would not be able to drive over an obstruction of this height, without causing irreparable damage to its drive train and steering mechanisms. Positioned and aligned at appropriate distances across the road, Bell Bollards can also act as effective width restrictors, preventing oversize vehicles from passing through.
Original Bell bollard.
Bell with 115 mm diameter hole.
Bell for City bollard.
Bell with 150 mm diameter hole.
Bell three quarter.
Bell with sub frame.
Bell kerb line.
Standard product features
Manufacturer recommends that top coats are applied on site after installation on primed products.
Consult manufacturer's literature for product dimensions and weights.