BauderSOLAR F XL
Verified by manufacturer 4 months ago
A flat roof PV mounting solution for framed solar modules.
Application
BauderSOLAR F XL is specifically designed to be installed on specific Bauder bituminous or single-ply waterproofing systems for framed solar modules manufactured by Bauder module partners.
BauderSOLAR F XL can be installed on slopes of up to 5° for bituminous membranes and 10° for single-ply membranes.
BauderSOLAR F XL is intended to be used in combination with the following membranes:
- Bauder Total Roof System.
- Bauderflex.
- Bauder Thermofol – minimum 1.8 mm mechanically fixed or adhered, all colours.
- Bauder Thermofol Fleece Back – minimum 1.5 mm mechanically fixed or adhered, all colours.
- Bauder Thermoplan – minimum 1.5 mm mechanically fixed, all colours.
Description
BauderSOLAR F is a flat roof PV mounting solution for framed solar modules. The mounting units are secured to the roof using a membrane-to-membrane welding technique. This installation method means that the roof is not compromised by penetrations for fixings, nor does it require ballast, which would add additional weight loading to the roof. Provides a lightweight, low risk and quick to install mounting solution.
The number of mounts and fixings required will vary from project to project. Please contact Bauder for a project specific technical report for further information. Windload and snowload calculations will also be provided on a project specific basis.
Only to be used as part of a full Bauder Waterproofing System.
General information
Color | Black |
Material | Polyamide Polypropylene |
Warranty description | Manufacturer guidanceA comprehensive range of guarantee options are available. Please contact your local Bauder Area Technical Manager for more information. |
Uniclass |
Specification data - Roof anchors for solar modules
Material | Polypropylene (PP) and polyamide. |
Anchor type | Suitable for use on Bauder bituminous or single ply waterproofing systems. |
Components | Main substructure, Welding Sleeve, Baseplate, Bayonet Cap, Bayonet Safety Pin, Module Locking Pin. Main substructure, Welding Sleeve, Baseplate, Bayonet Cap, Bayonet Safety Pin, Module Locking Pin, Separation layer. Guidance for specification option: Separation layer for PVC roof membranes only 6 mm thick, pre-cut to sit over the Bauderwelding sleeve. (Recycled rubber granulate with an aluminium foil backing). |
Sustainability data
Country of product manufacture | Germany |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | Manufacturer guidancePlease refer to EPD on the Bauder website. |
BIM objects
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
| Platform | Compatible | Version |
|---|---|---|
 Revit | - | 1 |
 IFC | - | 1 |
Literature
Solar PV Systems - Bauder brochure
BauderSOLAR F XL - Technical Data Sheet