Compare

Bauder LiquiTEC Cold Balcony / Walkway Cold Roof System - Cold Applied

Name: Bauder LiquiTEC Cold Balcony / Walkway Cold Roof System - Cold Applied
Brand: Bauder Ltd
SKU: uWDhyGAF2jUNCRhMuRmhF8

Verified by manufacturer 2 months ago

Bauder Ltd

Third party certifications:

BBA Agrément Certificate
Certificate type
EPD
Certificate type

Cold liquid applied balcony and walkway system suitable for new build and refurbishment applications. A range of colour finishes are available.

Jump to:

BOS

+44 (0)1473 257671 Website

Application

Cold liquid-applied balcony and walkway system suitable for new build and refurbishment applications.

Description

Cold liquid-applied, cold roof system suitable for new build, refurbishment and green roof applications. It is compatible with most existing waterproofing products, making it suitable for use as an overlay system. The system is appropriate for both new build or refurbishment applications for cold, warm, and inverted roof constructions. The system can be used as exposed roof waterproofing or as a roof terrace when protected by hard landscaping as well as extensive and intensive green roof systems. The system can be used in zero falls applications in protected roof situations.

Plus points:

A distinct advantage is the fast cure times for installation on areas continuously in use by the building’s occupants so that any inconvenience is kept to a minimum.
Thick layer system with a choice of surface finishes and colours.
Full bonding to the substrate.
Polyester reinforced system over occupied areas.

Verified properties:

CCPI Verification 0007700033/1125: this systems CCPI mark provides accuracy of data delivering assurance to specifiers.
BBA Certificate 14/5152
Fire properties – membranes deemed “unrestricted” in certain circumstances as categorised in BBA certificate.
Fire classification BROOF(t4) to BS EN 13501-5 tested to TS 1187 test 4 for external fire exposure on defined permutations of product build up.
Service life > 15 years.
EPD Certification: LiquiTEC products.

General information

Color	Grey Guidance for specification option: LiquiFINISH, Blue grey (RAL 7031). LiquiFINISH, Stone grey (RAL 7030). LiquiFINISH, Traffic grey (RAL 7043). Manufacturer guidance Bauder LiquiBALKON is Pebble Grey (RAL 7032).
Finish	- Manufacturer guidance Granular quartz finish.
Material	Polymethyl methacrylate (PMMA) Manufacturer guidance Liquid applied polymethyl methacrylate membrane.
Shape	Formless Guidance for specification option: Liquid.
Warranty description	- Manufacturer guidance A comprehensive range of guarantee options are available. Please contact your local Bauder Area Technical Manager for more information.

Uniclass	Ss_30_40_30_40 Liquid-applied cold roof covering systemsPrimary
CAWS	J31/110 Cold deck roof coating J31/5 Cold deck roof coating

Product range	Liquid-applied roof covering system - Cold Applied

Specification data - Liquid-applied cold roof covering systems

Preparation	-
Horizontal work	Bauder LiquiPRIME 1. Guidance for specification option: A cold liquid-applied, fast-curing primer, for use when installing the Bauder LiquiTEC system over asphalt, timber and bitumen-based substrates. The product is a poly(methyl methacrylate) (PMMA)-based resin, and requires the addition of a catalyst to trigger curing. It is solvent, isocyanate and halogen-free, minimizing its environmental impact. Colour: Clear. Coverage: 0.4 kg/m² (minimum). Application temperature: 0–35°C. Application method: Roller. Rainproof time: 30 minutes (approximate). Overcoat/ traffic time: 45 minutes (approximate). Bauder LiquiPRIME 2. Guidance for specification option: A cold liquid-applied, fast-curing primer, for use when installing the Bauder LiquiTEC system over brick, block and cementitious-based substrates. The product is a poly(methyl methacrylate) (PMMA)-based resin, and requires the addition of a catalyst to trigger curing. It is solvent, isocyanate and halogen-free, minimizing its environmental impact. Colour: Clear. Coverage: 0.4 kg/m² (minimum). Application temperature: 0–35°C. Application method: Roller. Rainproof time: 30 minutes (approximate). Overcoat/ traffic time: 45 minutes (approximate).
Skirtings and vertical work	As 'Horizontal work'.
Liquid-applied waterproofing	-
Type	LiquiBALKON. Guidance for specification option: A fast-curing wateproofing resin, for use on the main flat area of the LiquiTEC Balcony / Walkway System, beneath the Quartz layer or other hard landscaping elements. It is a poly(methyl methacrylate) (PMMA)-based resin that requires a catalyst and is solvent, isocyanate and halogen-free. Colour: Pebble grey (RAL 7032). Coverage: 3 kg/m² (minimum). Application temperature: 0–35°C. Application method: Roller. Rainproof time: 30–90 minutes. Overcoat/ traffic time: 45–180 minutes.
Reinforcement	Bauder 110 g/m² reinforcement fleece.
System accessories	Not required. Bauder 100/60 GRP Trim Angle. Guidance for specification option: GRP roof edge trim for use with Bauder Cold Applied Liquid Waterproofing systems where the system is terminated at perimeter details, such as drip edges, watercheck kerbs or parapets. Length: 3 m. Face depth: 60 mm. Fixing arm: 100 mm. Note: The trim may be used either way round as required. Thickness: 2 mm. Colour: Black. Installation: - The trims must be bedded in Bauder Sealant and mechanically fixed with corrosion resistant flush headed screws. - Fixings centres must be no greater than 300mm with fixings within 50mm of the ends. In high wind risk areas or above 10m high, fixing centres are to be at no more than 150mm. - The new trim must cover any open joint, which may exist between the kerb and the top of the wall by a distance of minimum 20mm. - The reinforced Bauder LiquiTOP System is to be dressed over the trim to its full extent and past the edge of the downward facing edge. Once the system has cured, the excess is to be trimmed off to a neat finish. Bauder Aluminium Termination Bar. Guidance for specification option: Natural finish aluminium alternative to a lead counterflashing, for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall. Bauder GRP Termination Bar. Guidance for specification option: Black glass-reinforced plastic (GRP) alternative to a lead counterflashing, for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall. Bauder lightning conductors. Guidance for specification option: Lightning conductor clips are specially designed, secure clips that allow for movement. Bauder Lightning conductor – Type 4: polyvinyl chloride (PVC)-coated or bare conductor. Bauder LiquiDETAIL. Guidance for specification option: Cold liquid-applied, fast-curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing, and is solvent, isocyanate and halogen-free. Bauder rooflights/ glazing/ ventilation. Guidance for specification option: All these glazing products are fully compatible with the roof waterproofing systems. Consult manufacturer for details and insert requirements. BauderDOME Rooflight. Bauder Euroglaze Rooflight. Bauder Special Modular Rooflight. Bauder Continuous Rooflight. Bauder Walk-on Rooflight. Bauder Direct Glazing. Bauder AOV. Bauder Modular Link Glazing. Bauder Structural Rooflight. Bauder Fire Rated Rooflight. Thermofol PVC Rigid Outlet. Guidance for specification option: A rigid PVC outlet enabling Themofoil membrane to be welded to the flange plate. UV stable throughout.

Wearing course	LiquiFINISH, Blue grey (RAL 7031). Guidance for specification option: Standard, fast-curing final coat, used to seal and bind the quartz wearing course. LiquiFINISH, Stone grey (RAL 7030). Guidance for specification option: Fast-curing final coat, used to seal and bind the quartz wearing course. LiquiFINISH, Traffic grey (RAL 7043). Guidance for specification option: Fast-curing final coat, used to seal and bind the quartz wearing course. Manufacturer guidance LiquiFINISH: A cold liquid-applied, fast-curing final coat, used to seal and bind the quartz wearing course in LiquiTEC Balcony, Walkway and Terrace Systems, and also used to provide the desired colour to the finished waterproofing. It is a poly(methyl methacrylate) (PMMA)-based resin that requires a catalyst and is solvent, isocyanate and halogen-free. Coverage: Over quartz: 0.65 kg/m² (approximate); to smooth areas: 0.50 kg/m² (approximate). Application temperature: 0–35°C. Rainproof time: 30 minutes. Overcoat/ traffic time: 60 minutes.
Surfacing layer	LiquiBALKON incorporating Bauder Quartz. Guidance for specification option: A fast-curing waterproofing resin, for use as surfacing incorporating the Bauder Quartz, or beneath landscaping elements. It is a poly(methyl methacrylate) (PMMA)-based resin that requires a catalyst and is solvent, isocyanate and halogen-free. Colour: Pebble grey (RAL 7032). Coverage: 1.5 kg/m² (minimum). Quartz Coverage: 7.0 kg/m² (minimum). Application temperature: 0–35°C. Application method: Roller. Rainproof time: 45 minutes (approx). Overcoat/ traffic time: 60 minutes (approx). Able to withstand stress: 180 minutes (approx).

Sustainability data

Contains Red List materials	No
Country of material origin	Germany
Country of product manufacture	Germany
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	- Manufacturer guidance Please refer to EPD on the Bauder website.