BASF - MasterTop 1324

A 1–4 mm thick self-smoothing resilient polyurethane flooring system provides a tough scratch resistant floor finish suitable for use on substrates subject to vibration and dynamic forces.

It is a seamless floor without joints or welds even around columns and over large open areas. Whilst being robust enough for industrial applications, the fully light stable topcoat enables light colours to be used in bright commercial and retail environments. Optional coloured flake scatter and a clear seal may be applied to produce a variety of aesthetic effects.

System components:

• Primer: MasterTop P617 with F5 filler.

• Body coat: MasterTop BC375N.

• Top coat: MasterTop TC442W or MasterTop TC417W.

Slip resistance:

Slip resistance will vary depending upon the method and conditions of application, the nature of any polishes used and the standards of housekeeping. Typically the coefficient of friction as measured using the TRRL slip resistance tester and 4S rubber is as follows:

• Standard finish 70 (dry).

• Slip resistant finish 60 (dry) and 36 (wet).

Features and benefits:

• Flexibility enhances impact resistance and accommodates flexure of suspended substrates.

• Can be installed on to old asphalt substrates.

• Monolithically bonded to the substrate.

• Seamless coving available without seams or welds even at external corners and columns.

• Low emission to AgBB.

• 40 year life cycle costing.

• CE marked.

Applications:

The system is used to provide bright durable floors for industrial and commercial applications.

• Production and assembly halls.

• Pharmaceutical clean rooms.

• Retail stores.

• Warehousing.

• Office, exhibition and show room floors.

• Hospital and care homes.

• Technical areas and plant rooms.

In wet areas, the manufacturer recommends using the slip resistant finish.