Ashdown Timber Bollard

Description

Furnitubes' timber bollards harmonise within both natural and man-made surroundings. Timber bollards offer a timeless elegance and, being of natural material, age gracefully.

All hardwoods used by Furnitubes International are supplied by countries where governments operate strict controls on the size of trees that can be felled and where a forest conservation policy and replantation programme is in operation.

Hardwoods such as Greenheart, Wallabe or Opepe, which are classified as 'naturally very durable', are used for the Ashdown range.

These timbers are extremely strong and have a good fire resistance. To form a pedestrian barrier, timber bollards can be drilled to accept tubes or fitted with eye bolts for chains. Bollards can be supplied with holes to enable them to perform as a knee rail.

Bollards installed 1000 mm above ground aid the visually impaired and can assist with the requirements of BS 8300.

General information

Finish

Sadolin Woodstain

Uniclass 2015

Pr_20_76_08_36 Hardwood bollardsPrimary

CAWS

Q50/190 Bollards

null Street furniture

Product range

Bollards

Specification data - Hardwood bollards

Product Reference

Ashdown Timber Bollard

Type

See 'Options' below and insert requirements.

Holes

33 mm

Diameter holes for steel rail.

42 mm

Diameter holes for steel rail.

48 mm

Diameter holes for steel rail.

Accessories

None

CHNS

Steel spiked chain link, galvanized.

CHNP

Steel plain chain link, galvanized.

EBAB

Steel M10 eye bolt, bright zinc plated.

SLNK

Steel split link, galvanized.

TAPE C

Red/ white chevron reflective tape.

TAPE R

Red reflective tape.

TAPE W

White reflective tape.

TAPE Y

Yellow reflective tape.

Standard product features

Material/ Finish:

Opepe hardwood.

Material is subject to availability - alternatives may be offered including Wallebe and Greenheart.

Finish:

Sadolin Woodstain.

Colour:

Mais.

Fixing:

Root fixed.

Product Options

Type:

Insert product code prefix ARP, followed by diameter section and overall height, for example: ARP 125/750.

The following diameter sections are available:

  • 125 mm.
  • 150 mm.
  • 175 mm.
  • 200 mm.
  • 225 mm.

The following overall heights are available:

  • 750 mm.
  • 900 mm.
  • 1200 mm.
  • 1500 mm.

Note: Hardwood type is variable due to fluctuating availability of raw materials. Consult manufacturer regarding current stock material.

Grooves:

Bollards are available with a square cut groove, to allow for a reflective band if required. Replace product code prefix ARP with ARG if a groove is required.

Holes for rails:

Most bollards are available with pre-drilled holes to accept carbon steel rails. State size and number of holes required, height below top of bollard to the centre of the hole and whether the post is an end, intermediate, corner, 3 or 4 way junction, when specifying.

Literature

Furnitubes Bell & Avector Bollards Brochure

Furnitubes Bell & Avector Bollards Brochure

Similar products from Furnitubes International Ltd

Epping Timber Bollard

Epping Timber Bollard

Garrick Timber Bollard

Garrick Timber Bollard