NBS Source
I'm a manufacturer

Application

ARDEX MVS 95 is designed to suppress residual construction moisture in cementitious substrates including suitably prepared power floated concrete and cement/ sand screeds. ARDEX MVS 95 is designed for use as a two coat system. When fully dry, two coats of ARDEX MVS 95 produces a membrane which can accommodate hygrometer readings up to 95% RH, and allows the subsequent application of ARDEX Levelling and Smoothing Compounds without priming.


ARDEX MVS 95 can be used on heated screeds that have been installed and commissioned in accordance with BS 8204 Part 1, taking into account the recommendations in Part 4 of BS EN 1264. It is not suitable for use on direct to ground substrates without a functioning, structural damp proof membrane.

Description

A ready-for-use, one component, water based, dispersion coating supplied in pre-gauged 12 kg units. It is supplied pigmented blue to indicate uniform coverage and is waterproof when fully cured. It is designed to suppress residual construction moisture in cementitious substrates including suitably prepared power floated concrete and cement/ sand screeds. Designed for use as a two coat system. When fully dry, two coats produce a membrane which can accommodate hygrometer readings up to 95% RH and allows the subsequent application of ARDEX levelling and smoothing compounds without priming.


The product can be used on heated screeds that have been installed and commissioned in accordance with BS 8204-1, taking into account the recommendations in BS EN 1264-4. It is not suitable for use on direct to ground substrates without a functioning, structural damp proof membrane. Refer to the ARDEX DPM, ARDEX DPM 1C or ARDEX DPM 1CR datasheet for applications where no structural damp proof membrane exists or the relative humidity is above 95% RH.


Features and benefits:

  • Suppresses residual construction moisture in concrete slabs and cement/ sand screeds.
  • Apply ARDEX levelling and smoothing compounds direct without priming in as little as two hours.
  • Ready for use, resealable and re-useable.
  • Water based, low VOC technology.

General information

Color

Blue

Material

Water-based

Guidance for specification option:

One component, water based, dispersion coating

Shape

Formless

Uniclass

Pr_35_31_77_12 Cement-based screed surface sealersPrimary

CAWS

M10/680 Surface sealer to wearing screeds

Specification data - Cement-based screed surface sealers

Material

Cement-based.

Drying time

2 hours.

Sustainability data

Country of product manufacture

United Kingdom

BIM objects

BIM object icon

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
IFC
-

2

Revit

Revit 2016

2

Literature

ARDEX RIBA CPD Seminars Brochure

ARDEX RIBA CPD Seminars Brochure

ARDEX Datasheets Booklet

ARDEX Datasheets Booklet