A hard wearing two part polysulphide sealant to ISO11600 F25HM for use in heavily trafficked floor joints, or joints requiring a high degree of chemical resistance.
A two part polysulphide sealant suitable for structural floor joints. It is not recommended for joints subject to large and frequent movement or for use with potable water.
The sealant is resistant to most alkalis and dilute acids, petrol, diesel, jet fuel and many solvents and vegetable oils. Arbokol 2150 burns, but will not readily ignite, so does not constitute a fire hazard.It can be painted, but excessive joint movement may cause the paint to crack and could induce tears in the sealant.
Correctly applied, the sealant should not require maintenance, and has an anticipated life in excess of 20 years. When used in trafficked areas, or in special environments such as swimming pools, the life may be reduced.
J21/770 Installing movement joints
M40/75 Sealant movement joints
M40/805 Sealant movement joints with metal edgings
M40/815 Sealant movement joints
M41/455 Sealant movement joints with metal edgings
Joint backing: Closed cell foam polyethylene rod
Joint backing: Fibre-board with bond breaker tape
Standard product features
ISO 11600 12.5P F and ISO 11600 25HM F (non-biodegradable version)
+5 °C to +50 °C.
14 days at 20°C.
Primer for stainless steel: Arbo Primer 7781. Primers are available to suit other substrates - refer to technical literature for details. A primer is not required for mill finished aluminium, anodized aluminium or galvanized steel.
A combined joint filler/bond breaker such as closed cell foam polyethylene rod should always be used to ensure that the sealant only adheres to the joint faces and not the back. Where the joint has been packed out with fibre-board, bond breaker tape should be used.
Health and safety:
Some components are labelled as toxic. Use of this product should be recorded in the project Health and Safety Plan.
© 2021 NBS Enterprises Ltd. All rights reserved.