NBS Source
List your products
Description

A one part, high strength, quick grab, multipurpose filling adhesive that bonds a wide range of substrates.

Suitable for fixing wall panelling, skirting boards, door surrounds, fascia boards, floor grippers, metal strips, laminates and veneers. Will bond together timber, brick, PVCu, metal, plywood, hardboard, insulation materials (not polystyrene) and ceramics.

Suitable for interior and exterior use.

Cleaning solutions can be specified separately.

Health and safety:

Contains solvents.

General information
Specification data - Solvent-based synthetic rubber resin adhesives

Product Reference

Arbogrip TF

Standard product features

Technical data:

  • Application temperature: +5°C to +50°C.
  • Service temperature: -15°C to +70°C.
  • Chemical resistance: Resistant to petrol, diesel and jet fuel, most common solvents and vegetable oils. Unaffected by most alkalis and diluted acids.
  • Adhesion: Good to concrete, stone, metals and many common building materials.
  • Typical Shore A hardness: 95.
  • Cure rate at 20°C in a typical 10 mm x 10 mm joint: 7 days.
  • Storage life: 9 months in original unopened package.

Movement accommodation:

Butt joints: 5% movement in tension and compression.

Colour:

Natural.

Joint sizes:

Width:

  • Minimum 6 mm.
  • Maximum 25 mm.

Depth:

Miniumum: 10 mm on porous substrates (12 mm in floor joints); 6 mm on non-porous substrates (12 mm in floor joints).

Width: Depth ratio (within above minimum/ maximum restrictions):

Floor joints: 1:1.

Product Options

Similar products from Carlisle Construction Materials Limited